Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fig. 1
Thank you for having chosen a quality product of Bitron Home, an Urmet Group brand. Bitron Home
products have been specifically designed for use with the QIVICON platform for which they are approved.
QIVICON enables you to manage and control you smart phone in a really easy way: applications for PC,
tablet and smartphone let you manage all connected devise, at any time and from anywhere.
INSERT OR REPLACE THE BATTERY
In the original packaging the battery is not inserted into the device yet. To mount or to replace the battery
open the compartment by turning the circle with a coin or with a flat screwdriver (Fig. 1). Insert the battery
respecting the polarity and close the compartment by turning the circle to its initial position.
After replacement of the battery, it is not necessary to register the remote control again.
SET-UP AND OPERATION
In order to set-up this device you need to have a QIVICON home base which is equipped with a QIVICON
ZigBee® radio stick. The home based needs to be set up and you need a valid user account. For further
information, please refer to http://www.qivicon.de/support.
1.
Remove plastic cover which protects the battery during transport on the back of the device (Fig. 1).
2.
Log on at Mein QIVICON (www.qivicon.de/login). Go to Gerät hinzufügen and select the
manufacturer Bitron Home. Then choose your device (Fig. 2).
3.
Follow the connection wizard's instructions.
If you wish to associate the device to a different home base, e.g. in case you need to replace the home
base, repeat steps 2 and 3.
The press of each button which has been correctly transmitted to the home base will be confirmed by brief
flash of the red LED light (Fig. 3). If you do not see a red light after having pressed a button, check if you
are within the radio coverage of the home base, if battery level is sufficient, and if the remote control has
been correctly registered to the home base.
3
Fig. 2
Fig. 3
DS902010-003
Werbung
