Herunterladen Diese Seite drucken

Werbung

Park Tool Co.
5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
PRS-4W-1 Deluxe Wall Mount Repair Stand
(with 100-3C Adjustable Linkage Clamp)
PRS-4W-2 Deluxe Wall Mount Repair Stand
(with 100-3D Micro Adjust Clamp)
NOTES:
• The clamp of the repair stand can be rotated 360
degrees, allowing easy access to any component of the
bike. To adjust the rotational angle of the clamp, loosen
the locking lever (#9) of the lock block assembly, rotate
the clamp to the desired position, and re-tighten the
lever to lock the clamp.
• Some bike manufacturers recommend not clamping
thin-walled or carbon fiber frames. Consult manufac-
turer for suggested clamping location.
• To avoid damage to finish, clean tube before clamping.
• The two clamping jaws each have a recess to provide
clearance for cables. Make sure any brake or shift
cables are in one of the recesses before clamping.
• When clamping heavy bikes in the repair stand, loosen
locking lever (#9) on lock block assembly and remove
clamp from stand. Secure clamp to the bike, then use
both hands to lift the bike (with the clamp attached).
Slide clamp back into the stand and tighten locking lever
to secure.
• Keeping the front of the bike slightly lower than the
back will help prevent the front wheel and handlebars
from flopping and hitting the frame's top tube. A Park
Tool HBH-2 Handlebar Holder should be used to prevent
handlebar flopping if the bike is being rotated in the
repair stand.
Assembly of PRS-4W-1 and PRS-4W-2
4
1 0
3
© 2015 Park Tool Co. / PARK TOOL® and the color BLUE are registered trademarks of Park Tool Co.
Deluxe Wall Mount Repair Stand
1
OR
2
PRS-4W-1 / PRS-4W-2
1
2
Part No.
Description
100-3C
Adjustable Linkage (PRS-4W-1)
1
100-3D
Micro Adjust Clamp (PRS-4W-2)
2
196-4
Wall Mount Weldment
3
113S
Threaded Lock Block
4
115S
Spring
5
114S
Unthreaded Lock Block
6
112S
Lock Block Bolt Assembly
7
110S
Ball Knob
8
111S
Locking Lever
9
109S
Spring Pin 5/32" x 1-1/4"
1 0
180
Lock Block Assembly
9
8
1 0
7
6
5
4
3
(includes items 4 through 10)
Qty.
1
1
1
1
1
1
1
2
1
1
1
09/15

Werbung

loading

Inhaltszusammenfassung für parktool PRS-4W-1

  • Seite 1 PRS-4W-1 / PRS-4W-2 Deluxe Wall Mount Repair Stand Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com PRS-4W-1 Deluxe Wall Mount Repair Stand (with 100-3C Adjustable Linkage Clamp) PRS-4W-2 Deluxe Wall Mount Repair Stand (with 100-3D Micro Adjust Clamp) NOTES: •...
  • Seite 2 PRS-4W-1 / PRS-4W-2 Deluxe Wall Mount Repair Stand Park Tool Co. 5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com PRS-4W-1 Soporte de Pared para Repa- PRS-4W-1 Deluxe Montagearm f. Wand- PRS-4W-1 Pied de Réparation Deluxe pour ración DeLuxe (con Modaza befestigung (mit 100-3C Justi- Fixation Mural (avec Pince à...

Diese Anleitung auch für:

Prs-4w-2