Herunterladen Diese Seite drucken
M60EC004
EN
Assembling scheme
DE
Aufbauanleitung
FR
Schéma d'assemblage
EN
Variety of the sizes
DE
Vielzahl der Größen
FR
Variété des tailles
EN Type of the door
DE Art der Tür
FR Type de porte
EN Type of the door handle
DE Art des Türgriffs
FR Type de poignée de porte
EN With or without the lock
DE Mit oder ohne Schloss
FR Avec ou sans la serrure
2020-07-23
a -x1
00:10
M48D0002
M48A0221
3.5x17
M42A0017
M48A0133
3.0x20 K
M42A0006
M45F1039
3.0x15 P
M42A0004
*Quantity depends on the type of
EN
the cabinet.
DE *Menge hängt von der Art des
Schranks ab.
*La quantité dépend du type
FR
d'armoire.
b - x1
*
M4x12
M42C0010
*
M4x22
M42C0009
*
5
M48A0031
*
M48A0225
*
M48A0134
*
M45F4001
*
M45F1002
*
M45F9040
*
M45F4001
*
*
*
*
*
*
*
*
*
1/6
loading

Inhaltszusammenfassung für Weber M60EC004

  • Seite 1 M60EC004 Assembling scheme Aufbauanleitung 00:10 M4x12 Schéma d'assemblage M42C0010 Variety of the sizes Vielzahl der Größen Variété des tailles M4x22 M42C0009 EN Type of the door DE Art der Tür FR Type de porte M48D0002 M48A0031 EN Type of the door handle...
  • Seite 2 M60EC004 2020-07-23...
  • Seite 3 M60EC004 EN *Soft close hinges DE *Dämpfung Scharniere FR *Charnières à fermeture douce 1H / 2H / 3H 2020-07-23...
  • Seite 4 M60EC004 2020-07-23...
  • Seite 5 Cabinets with lock M60EC004 Schränke mit Schloss FR Armoires avec serrure 2020-07-23...
  • Seite 6 M60EC004 *1H / 2H / 3H 2020-07-23...
  • Seite 7 M60EC103 Assembling scheme Montageschema 15/18 5/11x34 8x30 Schéma d'assemblage M42B0001 M42B0022 M42H0001 a - x1 b - x1 c - x2 d - x1 4/18 10/13 4.5x45 M45A3013 M45A2029 M42A0110 4,0x15 6,3x13 20x17 M42A0056 M42C0029 M42J0027 C2C080 C2C100 C2C081 C2C101 C2H081 C3C080 C3C100...
  • Seite 8 M60EC103 2020-05-28...
  • Seite 9 M60EC103 Important! Use fasteners to ensure stability. Achtung! Verwenden Sie Befestigungselemente, um die Stabilität zu gewährleisten. FR Importante! Utilisez des attaches pour assurer la stabilité. 2020-05-28...
  • Seite 10 M60EC103 Important! Use fasteners to ensure stability. Achtung! Verwenden Sie Befestigungselemente, um die Stabilität zu gewährleisten. Importante! Utilisez des attaches pour assurer la stabilité. 2020-05-28...
  • Seite 11 M60EC108 Assembling scheme Aufbauanleitung 5x11 20x12.5 Schéma d'assemblage M42B0067 M42B0049 M42O0006 EN Fixed shelves DE Festen Einlegeböden FR Tablettes fixes a - x* EN Removable shelves DE Abnehmbare Einlegeböden FR Étagères amovibles b - x* EN Depends on order option DE Hängt von der Bestelloption ab FR Dépend de l'option de commande EN Note position of the fixed shelves...
  • Seite 12 M60EC108 2020-08-04...
  • Seite 13 M60EC115 Assembling scheme Aufbauanleitung 00:05 8x20 Schéma d'assemblage M42H0025 4.5x15 M42A0081 a - x1 2020-08-05...
  • Seite 14 M60EC115 2020-08-05...
  • Seite 15 Cabinets & shelving COMBUS EN Assembly scheme | DE Aufbauanleitung | FR Schéma d'assemblage 00:10 Example of the combination. Specific combination (wide, height, storage components type) depends on order option and choosen components. Beispiel für eine Kombination. Die konkrete Kombination (Breite, Höhe, Art der Ablagen) hängt von der Wahl der Komponenten und den Bestelloptionen ab.
  • Seite 16 Sets of storage components can be chosen individually and placed in various positions upon assembly. Instructions for other options provided with their packaging. Die Sets der Ablageelemente können individuell ausgewählt und bei der Montage in verschiedenen Positionen platziert werden. Die Anleitungen für andere Optionen liegen den jeweiligen Packungen bei.
  • Seite 17 1 x2/ M42B0002 3 x4 2 x2 5/11x34 8x30 M42B0022 M42H0001 M60EJ032...
  • Seite 18 1 x6 M42B0002 M60EJ032...
  • Seite 19 2 x6/ 3 x8/ 5/11x34 8x30 M42B0022 M42H0001 M60EJ032...
  • Seite 20 4 x8/ M45A3x For planter box installation at 1H level, check the a part of these instructions. Für die Montage der Blumenkiste auf der Höhe 1H den Teil a diese Anleitung beachten. Pour l'installation d’une jardinière au niveau 1H, voir la partie x de ces instructions. Use the template* Vorlage nutzen* Utiliser le modèle*...
  • Seite 21 P arts are provided with plinth package. Die Teile werden mit der Sockelpackung geliefert. Les pièces sont fournies avec un paquet de plinthes. Remove the template Vorlage entfernen Retirer le modèle M60EJ032...
  • Seite 22 For planter box installation at 2H or higher level, check the b part of these instructions. Für die Montage der Blumenkiste auf der Höhe 2H oder höher den Teil b diese Anleitung beachten. Pour l'installation d’une jardinière au niveau 2H ou supérieur, voir la partie b de ces instructions. 5 x4 M6x7.8 M42C0406...
  • Seite 23 Cabinets & Shelving COMBUS EN Assembly scheme | DE Aufbauanleitung | FR Schéma d'assemblage 00:20 Example of the combination. Specific combination (wide, height, storage components type) depends on order option and choosen components. Beispiel für eine Kombination. Die konkrete Kombination (Breite, Höhe, Art der Ablagen) hängt von der Wahl der Komponenten und den Bestelloptionen ab.
  • Seite 24 a - 3H b - 4H Unit size Grüße der Einheit Taille de l’unité Set of storage components could be chosen individually and placed in various positions upon assembly. Instructions for other options provided with other packages. Die Sets der Ablageelemente können individuell ausgewählt und bei der Montage in verschiedenen Positionen platziert werden.
  • Seite 25 Stability requirements | Stabilitätsanforderungen | Exigences de stabilité It is always recommended to fix COMBUS storage system to the wall or the floor, CAUTION considering there is a tip over risk. Tip-over Compulsory measures to ensufe furniture stability: Hazard Height Combination options Compulsory measures Additional limitations...
  • Seite 26 Il est toujours recommandé de fixer la combinaison au mur ou au sol, compte tenu d’un risque de AVERIT basculement. Risque de basculement Mesures obligatoires pour assurer la stabilité du mobilier : Combinaison Hauteur Type d’éléments de rangement Mesures obligatoires large Debout à...
  • Seite 27 1 x4* M6x7.8 M42C0406 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère Do not overtighten Nicht überdrehen Ne serrez pas trop les vis Fittings quantity depends on the selected combination and accessories. In some cases fittings should not be installed in each hole (e.g.
  • Seite 28 2 x4 M6x10 M42C0215 Do not tighten up Nicht festziehen Ne serrez pas 3 x4 M6x20 M42P0010 Do not tighten up Nicht festziehen Ne serrez pas M60EJ035 6/14...
  • Seite 29 Tighten up Schrauben festziehen Resserrer les vis M60EJ035 7/14...
  • Seite 30 Please support the frames by hand, do not allow bending to the plinth. Bitte halten Sie die Gestelle fest, damit sie den Sockel Tighten up nicht verbiegen. Schrauben festziehen Resserrer les vis Veuillez maintenir les cadres avec la main, ne les laissez pas plier la plinthe.
  • Seite 31 5 x4 4.0x20 P M42A0028 M60EJ035 9/14...
  • Seite 32 Check the alignment Überprüfen Sie die Ausrichtung Vérifier l'alignement For freestanding units, check the b part of these instructions. Für freistehenden Einheiten Teil b der Anleitung beachten. Pour les unités autoportantes, voir la partie b de ces instructions. Check the stability requirements at the page 3. If necessary, fix the combination to the floor, according to the b steps. Combination should be fixed at the corners, according to the example below.
  • Seite 33 Anchors should be selected according to the floor type. We recommend to use M8x115/45 anchors for concrete floors. If necessary, please consult with local construction specialist. Die Befestigungselemente sind je nach Fußbodentyp auszuwählen. Wir empfehlen für Betonböden die Benutzung von Bolzenankern M8x115/45. Wenn notwendig, ziehen Sie einen lokalen Fachmann hinzu.
  • Seite 34 Unscrew 2 screw, and tighten up bracket. Schraube 2 lösen und die Halterung festziehen. Dévisser la vis 2 et serrer le support. M60EJ035 12/14...
  • Seite 35 Use the template Vorlage nutzen Utiliser le modèle 4 x4 5 x4 M42K0067 4.0x20 P M42A0028 M60EJ035 13/14...
  • Seite 36 Remove the template Vorlage entfernen Retirer le modèle M60EJ035 14/14...
  • Seite 37 Cabinets & Shelving COMBUS EN Assembly scheme | DE Aufbauanleitung | FR Schéma d'assemblage 00:20* Example of the combination. Specific combination (wide, height, storage components type) depends on order option and choosen accessories. *Indicative assembly time of single 4H module combination with shelves.
  • Seite 38 Modules size Modulgröße Taille des modules. Set of storage components depends on order option and choosen accessories. This instructions document contains assembly information for storage elements with shelves. Instructions for other options provided with other packages. Das Set der Ablagen hängt von den Bestelloptionen und dem gewählten Zubehör ab.
  • Seite 39 Stability requirements It is always recommended to fix COMBUS storage system the wall, considering there is CAUTION a tip over risk. Tip-over Compulsory measures to ensure furniture stability: Hazard Overall height Compulsory measure ≤ It is mandatory to fix combination to the wall! >...
  • Seite 40 1 x4* M42B0019 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère 1 x4* M42B0019 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère M60EJ036...
  • Seite 41 Set of storage components depends on order option and choosen accessories. This instructions document contains assembly information for storage elements with shelves. Instructions for other options provided with other packages. Das Set der Ablagen hängt von den Bestelloptionen und dem gewählten Zubehör ab. Diese Anleitung enthält Montageinformationen für Segmente mit Regalböden.
  • Seite 42 3 x4* M45A30xx 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère Do not install caps to the bottom shelves. Die Verbindungsstücke nicht in jeder Position montiert werden. Raccords ne doivent pas être installés à chaque position. M60EJ036...
  • Seite 43 Align the units Einheiten ausrichten Aligner les unités M60EJ036...
  • Seite 44 4 x8 4.5x35 K M42A0041 Choose the preferable place Den gewünschten Aufstellort auswählen Choisir l'endroit approprié Recommended fixing places Empfohlene Befestigungsorte Emplacements de fixation recommandés 330 mm 330 mm 13.00" 13.00" 40 mm 40 mm 1.57" 1.57" M60EJ036...
  • Seite 45 Cabinets & Shelving COMBUS EN Assembly scheme | DE Aufbauanleitung | FR Schéma d'assemblage 00:15 Example of the combination. Specific combination (wide, height, storage components type) depends on order option and choosen components. Beispiel für eine Kombination. Die konkrete Kombination (Breite, Höhe, Art der Ablagen) hängt von der Wahl der Komponenten und den Bestelloptionen ab.
  • Seite 46 • Das Set der Ablagen hängt von den Bestelloptionen und • Set of storage components depends on order option dem gewählten Zubehör ab. Die Anleitungen für andere and choosen accessories. Instructions for other Optionen liegen den jeweiligen Packungen bei. options provided with other packages. •...
  • Seite 47 G1B346 a - x1 b - x1 c - x1 d - x1 5 x4 1 x4 2 x4 3 x8 4 x4 15/18 5/11x34 8x30 15/25 M6/30.3/8 M42B0001 M42B0022 M42H0001 M42B0002 M42B0019 6 x2 7 x2 9 x2 8 x2 8 x2 M42Z0133 M42J0027...
  • Seite 48 G1B379 a - x3 b - x3 c - x3 d - x3 1 x12 2 x12 3 x24 4 x12 5 x12 15/18 5/11x34 8x30 15/25 M6/30.3/8 M42B0001 M42B0022 M42H0001 M42B0002 M42B0019 6 x6 7 x6 8 x6 9 x6 8 x6 M42Z0133 M42J0027...
  • Seite 49 1 x4* 15/18 M42B0001 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère 2 x4* 3 x4* 5/11x34 8x30 M42B0022 M42H0001 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère M60EJ038 5/10...
  • Seite 50 4 x4* M42B0002 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère M60EJ038 6/10...
  • Seite 51 Instructions for other storage components provided with their packaging. Die Anleitungen für andere optionale Komponenten liegen den jeweiligen Packungen bei. Les instructions pour les autres éléments de rangement sont fournies dans leur emballage. M60EJ036 5 x4* M6/30.3/8 M42B0019 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère M60EJ038...
  • Seite 52 Check the alignment Überprüfen Sie die Ausrichtung Vérifier l'alignement 6 x2* 7 x2* M42Z0133 M42J0027 8 x2* 4.0x20 K M42A0020 2 pcs/shelve 2 Stück/Regal 2 pièces/étagère M60EJ038 8/10...
  • Seite 53 8 x2 M42B0091 2 pcs/shelve 2 Stück/Regal 2 pièces/étagère Align 8 pin with the hole Pin 8 mit dem Loch ausrichten Aligner la broche 8 ave le trou 3 x4* 8x30 M42H0001 4 pcs/shelve 4 Stück/Regal 4 pièces/étagère M60EJ038 9/10...
  • Seite 54 Place the top Oberseite aufsetzen Placer la partie supérieure Do not overtighten 9 x2 Nicht überdrehen M45A20* Ne serrez pas trop les vis M60EJ038 10/10...
  • Seite 55 Cabinets & Shelving COMBUS EN Assembly scheme | DE Aufbauanleitung | FR Schéma d'assemblage 00:05 Example of the combination. Specific combination (wide, height, storage components type) depends on order option and choosen components. Beispiel für eine Kombination. Die konkrete Kombination (Breite, Höhe, Art der Ablagen) hängt von der Wahl der Komponenten und den Bestelloptionen ab.
  • Seite 56 Set of storage components depends on order option and choosen accessories. Instructions for other options provided with other packages. Das Set der Ablagen hängt von den Bestelloptionen und dem gewählten Zubehör ab. Die Anleitungen für andere Optionen liegen den jeweiligen Packungen bei.
  • Seite 57 1 x4 M42O0111 Check if the pins are fixed in the position correctly. Prüfen, ob die Pins korrekt in ihrer Position fixiert sind. Veuillez vérifier si les broches sont correctement fixées à leur place. Press and hold the pin, while adjusting the back panel. Den Pin drücken und halten während die Rückwand eingepasst wird.