Perel Tools GWT Bedienungsanleitung

GWT – ELECTRONIC WATER TIMER (6 BAR)
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the GWT! Please read the manual thoroughly before bringing this device into service. If the device
was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• Keep the device away from children and unauthorised users.
3. Description
LCD Display
1. program status indicator
2. day of week indicators
3. skip day indicators
4. low battery indicator
5. time
6. valve status / open time indicator
7. start time indicator
8. program number
9. time setting mode indicator
Keyboard
Key Function
PGM Scroll through time setting mode and the four programs for review or adjustment.
ON/OFF 1. Manually open or close water valve.
2. Switch program day ON or OFF during program editing mode.
HR Adjust hour of clock program.
MIN Adjust minute of clock program.
DAY Adjust day of the week during time setting mode or select program day during program editing
mode.
HR + DAY Select time display mode format between 12 hours AM/PM or 24 hours.
MIN + DAY Enter or exit program override.
HR + MIN Reset the whole unit.
GWT 1 PEREL