Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Solar-powered LED Light Tube
Item no: 2865849
1 Operating Instructions for download
Use the link
www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
The product is a solar-powered LED light tube.
The product is not suitable for domestic lighting.
The product is powered by a rechargeable battery that is recharged via the solar panel dur-
ing the daylight hours.
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor
use. Do not submerge in water.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
3 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
Read the operating instructions carefully.
This product is constructed according to protection class III.
4 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
4.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
4.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
4.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
4.4 Operation
■
Lights become hot. Risk of fire! Remove from packaging before operating. Fully lay lights
out and install before operating.
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
3
(alternatively scan the QR code) to download the
4.5 (Rechargeable) Battery
■
Correct polarity must be observed while inserting (rechargeable) batteries.
■
(Rechargeable) batteries must be kept out of reach of children. Do not leave (re-
chargeable) batteries lying around, as there is risk, that children or pets swallow them.
■
(Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge non-rechargeable batteries. There is a risk of explosion!
4.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
5 Product overview
1
Solar unit
3
Button POWER (on/off)
6 Getting started
6.1 Finding a location
Find a location that exposes the solar module to full sunlight to allow the rechargeable bat-
tery to recharge during the day.
Consider the following:
■
The solar panel should be exposed to maximum sunlight. Do not set up the product in
the shade or under any cover.
■
Avoid the direct proximity of other light sources such as yard or streetlights, otherwise
the product will not switch on automatically at nightfall.
■
Avoid locations that are likely to be flooded.
■
If the product has a ground spike, the location should be level and sufficiently firm (ex-
ample: soil). Stony subsurfaces damage the ground spike.
6.2 Securing in the ground
After selecting a suitable location, secure the product in the ground.
1. Attach the ground spike to the base of the product.
2. Firmly hold the ground spike and insert it into the ground.
3. Check if the product secured. If not, find a more suitable location.
6.3 Charging for the first time
When using the product for the first time or after prolonged periods of low sunlight, fully
charge the rechargeable battery for 2 days in sunlight.
1. (If an insulation strip protrudes from the battery compartment) pull it out to establish the
power supply.
2. During daylight, press the button POWER to switch the product on. Expose the solar
panel to sunlight for as long as possible.
3. Before it gets dark, press the button POWER to switch the product off to prevent it from
switching on automatically.
4. On the next day, charge again.
à
After 2 days, the rechargeable battery is charged and the product ready for use.
7 Operation
Use the button POWER and button MODE on the solar unit to control the lights.
Switching on and off
1. Push the button POWER to activate the lights.
à
The lights will switch on as soon as it gets dark.
à
The lights will switch off as soon as it gets light.
2. Push the button POWER to deactivate the lights.
Selecting light modes
1. Repeatedly push the button MODE to switch between the light modes solid and flashing.
8 Replacing the battery
If the operation duration of the light becomes significantly shorter, replace the rechargeable
battery.
Preconditions:
1
2
3
M
M
O
O
D
D
E
E
O
O
N
N
/
/
O
O
F
F
F
F
P
P
O
O
W
W
E
E
R
R
2
Button MODE (switch light modes)
Werbung
