Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Pillmannstraße 12
38112 Braunschweig
Germany
www.tecxus.com
EN
General Notes
Read the user`s manual completely and carefully. It is part of the product and includes important information for proper
installation and use. Keep this user's manual for clarification and only pass it on together with the product.
Safety Instructions
Description, Function and intended Use
This product is a LED head lamp with High Power LED Chip. It is
useable for illuminating objects or hands-free activities and comes
with a 100/20% dimming function. It is IP54 splashwater-proof.
Other use is not permitted.
Scope of Delivery
Packing content
tecxus easylight HL70
Alkaline battery LR6
Preparing
1. Check the packing content by comparing it to the scope of delivery regarding
completeness and integrity.
2. Open the battery housing by turning.
3. Insert 2 Alkaline batteries LR6 in marked polarity.
4. Close the battery housing.
Operating
Using the Multifunction switch
The Multifunction switch handles several functions as follows:
1. Pressing the multi function switch 1 time completely:
2. Pressing the multi function switch softly 1 time in ON mode:
The torch changes between a brightness of 20% and 100%.
Adjusting the head band
The head band is adjustable between approx. 46-64cm.
1. Set the size by moving the buckle.
Adjusting the head lamp
1. Adjust the tilting angle of the head lamp individually between 0 ~ -90°.
User's Manual for Torches
Model:
tecxus easylight HL70
N
:
20132
o
Risk of self-intervention and misuse
>> Do not modify or alter either the product or the accessories!
>> Not meant for children.
>> Use product, parts and accessories only in immaculate condition.
>> Secure small parts and packaging against unintentionally use.
Risk of injury by blinding
>> Do not point on creatures or reflecting surfaces.
>> Do not stare into beam!
>> Do not use in road traffic.
Risk of injury by batteries
>> Use only Alkaline batteries. Rechargeable battery use is possible with differing performance.
>> Do not short batteries.
>> Avoid extreme conditions, such as extreme heat, cold, humidity or direct exposure to the sun,
as well as vibrations and mechanical pressure.
>> Check batteries regularly for their condition.
>> Remove and dispose old, leaked or damaged batteries professionally with protection gloves.
Risk of material damage by improper product combination
>> The specifications of all used products must match or be within the specified range.
Risk of material damage by inappropriate operating
>> Remove batteries / rechargeable batteries from the battery case when not in use for longer
time.
>> Remove and dispose old, leaked or damaged batteries professionally with protection gloves.
>> Do not clean with detergents and chemicals.
Amount
1x
2x
3/4
Battery housing
Headband
Head lamp
Multi Function Switch
Fig. 4: Operating Elements
Fig. 5: Preparing
Fig. 6: Adjusting the head band
Werbung
