Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROJECTOR MOUNT
CMF-7020-SL
Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar
products. Use the product only as described in this manual. Keep this manual in case you need it for future reference.
EN
The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com.
We recommend keeping the original packaging of the product, invoice and warranty certifi cate at least for the time the warranty is
valid. When shipping the product, we recommend using the original packaging that the product was delivered in that will provide the
best protection for it from being damaged during transport.
1
Warning
The wall or the surface used for securing the mount must have suffi cient strength and maximum load to secure the weight
of the mount, the projector and other accessories.
When installing the projector, use an assistance of another person.
During the installation, tighten the screws properly, but make sure not to strip the threads. That could damage the installed
projector or signifi cantly decrease the maximum load of the mount.
This wall mount is designed for indoor use only. Outdoor use may cause harm, damage to the mount or the installed projector.
Check the stability and safety of the mount at least every three months.
2
Specifi cations
CMF-7020-SL
PROJECTOR MOUNT
USER MANUAL
3
Package contents
4
Assembly
1.
3.
CMF-7020-SL
2.
4.
USER MANUAL
EN
Werbung
