DJI OSMO Bedienungsanleitung Seite 4

Double-sided Adhesive
Board (Flat)* ×1
*The Double-sided Adhesive Board on the Quick
Release Base can be replaced if required.
Installation
1. Attach the Quick Release Mount onto the
Osmo Gimbal Extension and tighten.
1
2. Attach the Quick Release Base onto a helmet.
Ensure that the helmet is clean and without
any oil.
3. Loosen the knob on the side, then attach the
Quick Release Mount to the Quick Release
Base.
Double-sided Adhesive ×3
2
5