Normfest PL 120 Bedienungsanleitung Seite 4

NORMFEST PL 120
GB Operating instructions
Normfest PL 120
SAFETY INSTRUCTIONS
• Read the operating instructions carefully before using and observe
the safety instructions!
• Do not use the device if there is damage to the housing, plug or
cable. Consult your local authorised specialist!
• The device must only be operated in closed, dry rooms!
• Carry out cleaning tasks only when the mains plug is removed from
the mains power!
• Do not open the device! Repair work and replacing the rechargeab-
le battery pack may only be carried out by electricians.
• Keep away from children! Children should be supervised in order to
ensure that they do not play with the device!
• This device is not to be used by persons (including children) who
have restricted physical, sensory or mental capabilities or who do
not have adequate experience and knowledge in handling this de-
vice. Such persons must be instructed beforehand by a supervisory
person who is responsible for their safety or must be supervised
during the use of the device!
• Failure to observe the safety instructions can result in dangerous
injuries to persons or damage to the device!
FUNCTIONAL OVERVIEW
• Professional workshop lamp with the latest SMD LED technology
• Small auxiliary light at the head of the lamp
• Robust, splash-proof plastic housing with rubber-coated grip
• Permanently installed Li-ion rechargeable battery pack (3.7V /
750mAh)
• Charging options via AC/DC mains adapter (110V-240V) or car
cigarette lighter adapter (12-24V)
• Charge monitoring via coloured LEDs
TECHNICAL DATA
Integrated illuminants
Main light: 7x 0.65W SMD LEDs
Auxiliary light: 1.5W LED
Lighting intensity: 200 Lux / 0,5m distance
Luminous flux: 120 Lumen
Battery life: ca. 3.5h (main light), ca. 5h (auxiliary light)
USE
The on/off switch for the workshop light can be found on the front of
the housing:
Press 1x: The auxiliary light on the head of the lamp will be switched
on.
Press 2x: The auxiliary light will be switched off and the main light will
be switched on at the 100% setting.
Press 3x: Both lights are switched off.
CHARGING PROCEDURE
Charge the workshop lamp fully before using for the first time. If the
workshop lamp has been stored for an extended period of time it
should likewise be fully charged again before first use.
The following charging options are available:
• Via USB mains adapter plugged into the mains outlet
• Via USB car adapter connected to the cigarette lighter of the
vehicle
• Via USB cable connected to a third party device with a USB output
port (e.g. PC, laptop)
To charge the PL 120 workshop light, pull the sealing cap off the
micro-USB socket on the rear of the lamp. Connect the USB mains
adapter / USB vehicle adapter with the PL 120 workshop lamp by plug-
ging the micro-USB plug on one end of the USB / micro-USB charge
cable provided into the micro-USB socket on the light and plugging
the USB plug on the other end of the charge cable into the USB socket
of the USB mains adapter / USB vehicle adapter. Then plug the USB
mains adapter into a mains outlet or plug the USB vehicle adapter
into the cigarette lighter of the vehicle. To charge the workshop light
with a third party device, plug the USB plug on the charge cable into
the USB socket of the third party device after having first connected
the micro-USB plug on the other end of the charge cable with the
workshop lamp as described above.
CHARGE STATUS INDICATION
REMAINING CAPACITY INDICATION
The Normfest PL 120 workshop lamp has a professional LED status
display on the rear of the lamp (above the charging socket). This can
be used to display the current charge status or the remaining capacity
of the integrated battery pack:
Display of the charge status of the battery pack during the
charge procedure:
• LEDs illuminate green: Battery pack is fully charged
• LEDs illuminate red: Battery pack is charging
The Normfest PL 120 workshop lamp is protected against over-char-
ging. This means that you can leave the workshop lamp connected to
the charging power after its rechargeable battery pack has been fully
charged.
ENVIRONMENTAL INFORMATION
The device should not be discarded in the normal household waste
under any circumstances. Dispose of the device via an authorised
disposal centre or your communal waste disposal facility. Observe the
current applicable regulations. Contact your waste disposal facility
in the event of any doubt. Dispose of all packaging materials via an
environmentally friendly disposal facility. Rechargeable batteries must
not be disposed of in the household waste. Return used rechargeable