Donner DC 20 Kurzanleitung Seite 7

3
Secure the cable to the microphone stand
or boom while using, leaving a slack loop
at the microphone. This will ensure the
most effective shock isolation and reduce
the possibility of accidentally pulling the
microphone out of its mount.
1
3
2
4
The microphone cable should be
ensured that it is wired Pin 1
shield, Pin 2 (+), Pin 3 (-).
5
SHIELD
COLD
HOT
5
After use the DC 20 should be
wiped with a dry, soft cloth and
placed in its protective zip pouch.