Megatron CAPPI Bedienungsanleitung Seite 2

Garden Fixture –
Instruction Manual
TECHNICAL SPECIFICATION
Series name
CAPPI
Model Number MT70813-2
Socket E27
Wattage Max. 80W LED PAR38
Voltage 220–240V~
Frequency 50/60 Hz
IP Rating IP44
CAUTIONS:
•
Read the entire manual carefully before installation and operation.
•
Switch off the power source before installation, replacement and cleaning.
•
Wearing gloves during installation is recommended to ensure the luminaire is kept in the best condition.
•
The minimum safety distance from the illuminated object is 0.1m.
•
It is recommended to use the PAR38 reflectors (Max. 80W) with water resistant outdoor features in order to main-
tain adequate outdoor protection degree for the luminaire. Using lamps with lower IP rating (< IP44) outdoors will
result in malfunction. Using incandescent lamp, halogen or other kind of light sources >80W will result in risk of
fire or electric shock.
•
The manufacturer accepts no liability for any damage resulting from the misuse of the luminaire or from when it is
used with inappropriate equipment.
•
The luminaire must not be operated, in case the external flexible power cord is damaged. The verification and
replacement should be handled by a licensed and qualified electrician for safety purpose.
•
Consult your dealer if you have any enquiries.
INSTALLATION:
Fit the lamp into the
luminaire.
Correct disposal of this product:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly,
to promote the sustainable reuse of material resources. To return your device, please use the return and collection
systems, or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
IDV GmbH | Birkenweiherstraße 2 | D-63505 Langenselbold | Germany | www.megatron-licht.eu
CAPPI
CAPPI 2
MT70814
E27
Max. 80W LED PAR38
220–240V~
50/60 Hz
IP44
0,1m
----
Titling Angle 180�
Tighten
Loosen
MEGATRON
Loosen the joint screw in order
to adjust the luminaire head
to the desired position. Fix the
setting by tightening the join
screw.
0,1m
----
®
GB