Wired Controller - Konix ONE PIECE Bedienungsanleitung

A
SWITCH CONSOLE
1. Connect the Switch console stand to the TV and turn the console on.
2. Connect the controller by USB connector into the switch console
stand, press the A button to connect, and when it is connected, the
LED indicator will be lit.
NOTE:
Please enter "System Setting", then "Controllers and Sensors" then set
the "Pro Controller Wired Communication" to "ON" status
• Joystick adjustment
If you encounter problems with the Joysticks, please calibrate them as
follows:
Press «Home» to enter the main menu and choose
« System Settings».
Choose « Controllers and Sensors» and then «Calibrate Control Stick»,
Press «A» to enter.
Now choose the Joystick you want to calibrate by simply pressing it.
Press «X» to start the calibration process and execute the actions on
screen.
PC COMPATIBLE
Directly plug the USB port to the PC console, by default it is set to X-input
mode.
No drivers are required on Windows, it will set up automatically.
MAINTENANCE:
Keep away from hot and wet environments.
Never force the USB plug into the Switch dock.
Keep away from liquids.
Do not try to open the controller
2

WIRED CONTROLLER