Herunterladen Diese Seite drucken

Audio System SUBFRAME M10 EVO2-D4 Anleitung Seite 64

Werbung

M-SERIES
EVO 2
Vorsicht: Beim Entfernen von Innenverkleidungen können
Befestigungsteile aus Plastik beschädigt werden und müssen ersetzt
werden. Wichtig: Die richtige Polarität des Subwoofers zum
Tief/Mitteltöner kann man durch Verpolen herausfinden.
Ausprobieren und hören bzw. messen ist hier sinnvoll!
Sicherheitstipps
WARNUNG: Befestigen Sie den SUBFRAME mit den mitgeliefertem
SUBFRAME MONTING-KIT sicher im Fahrzeug!
ACHTUNG: Bitte lesen Sie diese Anleitung sorgfältig durch und
beachten Sie die Hinweise.
Technische Daten
EVO 2-D4
SUBFRAME M10
Bassreflex/Vented Box mit/with M10-D4
Leistung/Power: 400/300 Watt
Impedanz/Impedance: 2 Ohm (intern 2x 4 Ohm)
Maße/Size: 580/550mm / 200mm
Gewicht/Weight: 15,6 Kg
Gehäuse-Volumen/Volume: 30 Liter
Anschluß (ACTIVE)
Achtung: Für die Version ACTIVE lesen Sie bitte die
Bedienungsanleitung der M-400.1 MD oder CO-220.1
aufmerksam durch und folgen Sie den Anweisungen.
Anschluß (nicht ACTIVE)
Wenn sie einen separaten Verstärker
verwenden, schließen Sie diesen an das
vorhandene Terminal an. Bitte beachten Sie die
Polarität.
Packungsinhalt
-
SUBFRAME MOUNTING KIT
-
bei Active: M-400.1 MD oder CO-220.1 inklusive
Kabelsatz
-
Bedienungsanleitung
Optionales Einbauzubehör
-
ALUBUTYL 1500, 2000
-
Dämmung: DOORKIT 1.0 und DOORKIT 2.0
-
Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Kupfer-Lautsprecherkabel
-
MBR165 / MBR 200 Spritzwasserschutz
audio system germany - falltorstrasse 6 - 76707 hambrücken
Anleitung / Manual
EVO 2
EVO
EVO
EVO
, 3000
, ALU 250
www.
Important: The right polarity of all speakers is extremely important
for the sound of your car audio system. We recommend changing
polarity of the subwoofer finding out the best possible sound. The
best is to listen or measure it with.
Safety Tips
WARNING: Fasten the SUBFRAME securely in the vehicle with the
SUBFRAME MOUNTING KIT supplied!
ATTENTION: Please read this manual carefully and follow the
instructions.
Specifications
SUBFRAME M10-2-D4
Bassreflex/Vented Box mit/with 2x M10-D4
Leistung/Power: 800/600 Watt
Impedanz/Impedance: 4 Ohm (intern 4x 4 Ohm)
Maße/Size: 580/550mm / 200mm
Gewicht/Weight: 19,4 Kg
Gehäuse-Volumen/Volume: 30 Liter
Connection (ACTIVE)
Attention: For ACTIVE version please read the manual of the M-
400.1 MD or CO-220.1 amplifiers carefully and follow the
instructions.
Connection (not ACTIVE)
Package Content
-
SUBFRAME MOUNTING KIT
-
ACTIVE: M-400.1 MD or CO-220.1 including cable
set
-
Manual
Optional Mounting Accessories
-
ALUBUTYL 1500, 2000
-
Damping: DOORKIT 1.0 and DOORKIT 2.0
-
Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Speaker-Cable
-
MBR165 / MBR 200 Splash Protection Rings
audio-system
EVO 2
If you are using a separate amplifier, connect it
to the existing terminal. Please note the polarity.
EVO
EVO
, 3000
, ALU 250
.de
EVO 2
EVO

Werbung

loading

Diese Anleitung auch für:

Subframe m10-d4 active 220 evo2Subframe m10-d4 active 400 evo2Subframe m10-2-d4 evo2Subframe m10-2-d4 active 220 evo2Subframe m10-2-d4 active 400 evo2