Vlectro OP 011850 Bedienungsanleitung Seite 8

Description
1. No need to install any drivers, it supports plug-and-play.
2. Suitable for desktop and laptop computers with USB ports.
3. This product for optical drives has multiple functions, including a docking station, and
supports the functions of an optical drive, SD card reader, and HUB.
4. Compatible with Windows XP/2003, Windows 7/8/8.1/10/11/Vista, Linux and Mac OS
X systems.
5. Supports reading, writing, playing, and burning a variety of CD/DVD discs. These
include DVD-ROM and DVD video discs, as well as CD-ROM, CD-R, CD-RW, DVD-
ROM, DVD-R, DVD-RW, DVD+RW, DVH+R, DVD+R DL, and DVD-R DL, as well as
DVD-RAM.
Product Usage
1. This product is easy to use. Simply plug the USB port of the product into the USB port
of your computer while it's turned on and running. Simply plug the USB port of the
product into the USB port of your computer while it's turned on and running. After
about 5-8 seconds, the "Optical Drive Le er" icon will appear on your "My
Computer" drive. Once the "drive le er" appears, open the drive tray and insert the
disc. The disc will be read successfully in approximately 10-15 seconds (make sure to
check the disc format before use). Media discs with various formats need
appropriate playback software to be installed on the computer to read and play
them.
2. The product's Docking station allows you to read and write from the optical drive, SD
card, and HUBhub at the same time. However, this will increase the product's power
consumption, so an auxiliary power supply of approximately 5V/1.5A needs to be
added to the Micro-5P port.
3. When using this product, connect the external drive to the computer's USB port
directly. If connected to the USB hub, the CD/DVD won't be recognized or read.
4. Remember: Keep the product in a clean, dry and ventilated room with an ambient
temperature between -20℃ and 35℃, and a relative humidity below 75%. Avoid
contact with corrosive substances and keep it away from sources of fire and heat.
6
EN