Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Amplifier Control: trigger input
The AVXP1 is provided with a trigger input made of a jack 3.5mm connector (zone 1 on the back
panel). This input should be connected via the dedicated cable included in the AV1 or AVX1
box to the partnered AV1 or AVX1 multi-channel Audio Video Processor or to another unit trigger
output.
Max signal allowed is 12V/120mA.
Dimmer Link
The AVXP1 offers an advanced dimmer / brightness control of the front panel button
IOTAVX
backlighting and logo badge. In order to ensure a synchronization of
products (AV1 or
AVX1 and AVXP1 in this case), the AVXP1 Dimmer link input should be connected to the AV1 or
AVX1 Dimmer output. This input is a 3.5mm jack connector (zone 6 on the back panel).
Basic operation
Once all connections have been made, turn the Main Switch to ON position. The Power button
will light up red.
If the Trigger Input has been connected to AV1 or AVX1, the power up of the AVXP1 will be
slaved to AV1 or AVX1. There is nothing more to do on AVXP1.
If the Trigger Input is not used, you must Power ON the AVXP1 manually by pressing the Power
button. After the internal checks procedure, the LED will turn White to indicate correct ON mode.
If the Dimmer link input has been connected to AV1 or AVX1, the AVXP1 light will synchronize
automatically.
AVXP1 Owner Manual
9
Werbung
