Profeco 77458 Gebrauchsanleitung Seite 14

5. Area/volume/ Pythagorean theorem
Press once, the icon will appear on the screen.
The button will move on the first distance measurement (such as length).
Pressing the button again will move to measure the 2nd distance (like width). The
area of the calculated result will be displayed on the main screen line. Very single
measuring result will be display on the 2nd or third line.
The function of volume.
Press 2 times, the icon appears on the screen.
Press: Move to the first distance measurement (such as length).
Press: switch to the second distance measurement (such as width).
Press: go to the second distance measurement (such as height)
The volume measuring result will be finally displayed on the main screen, the
previous 3 times result will be displayed on the first, second, third helped line.
Pythagoras measurement
This model can be completed automatic calculation by the Pythagorean law. This
function was designed with the aim of measuring the place where we can reach.
For example: see on the map the height of F, must measure 2 times
The step is:
Press 3 times, this icon will appear on the screen, the measured distance
will shine on the screen.
Button: measuring the rectangular side distance of triangle.
When measuring, try to keep the device standard.
Button, measuring the slanted side distance of the triangle.
If the measurement result satisfies the requirement of Pythagoras' Law (bevel
side＞ right angle side). The height of the indirect measuring shall be display on
the main line. The middle measuring value will be display on the second, third line
separately, presses 4 times and presses 5 times, the Pythagorean theorem
is a rarely used one, if you need, please refer to the above operations.
14