Panasonic TY-42TM4Y Installationsanleitung Seite 2

English
BNC Terminal Board Installation manual
WARNING :
• Users should not attempt to install or remove this product.
• Only a qualified service engineer should perform installation.
• Install this Terminal Board in the specified products only.
This product is a BNC Terminal Board, and must only be installed in the TH-42PW4, TH-42PWD4
models.
This should only be installed in the specified Plasma Display.
Failure to observe this point may result in damage to the projector and may further cause the
installed product to malfunction.
Please confirm the model number of your
Plasma Display
model number
• Do not touch the product directly.
Highly sensitive electronic components are fitted in high density.
Touching components or the board directly while installing may cause the product to
malfunction.(During installation, ensure static electricity is discharged to earth by suitable means.)
• Always pull out the power cables from the AC socket before commencing installation.
• Do not drop the product or allow any action that may cause damage to it.
• Do not place this product in water or allow it to become wet.
• Do not attempt to modify this product in any way.
This Terminal Board is the following arrangement
• After installing this product in the Plasma Display (TH-42PWD4 series), AV input and component input signals can
be displayed using BNC input Terminals.
R
AUDIO
IN
2
R - STANDBY
G POWER ON
TH-42PWD4
L
S VIDEO VIDEO VIDEO
IN IN OUT
AV
– +
R - STANDBY INPUT VOL
G POWER ON
R L
HD
AUDIO VD
COMPONENT/RGB IN
P /C /R P /C /B Y/G
R R B B