Herunterladen Diese Seite drucken

KEUCO Edition 400 51516 0101 Serie Montageanleitung Seite 3

Werbung

DE
Wichtige Informationen, bitte unbedingt lesen!
Diese Anleitung ist für den Installateur zur Mon-
tage sowie für den Nutzer zur Bedienung und
Wartung des Produktes. Bitte nach der Installati-
on an den Nutzer zur Verwahrung weitergeben.
Symbole und Bedeutung
Achtung! Warnung vor Personen- oder
Sachschaden.
Hinweis, Tipp oder Verweis
Falsche Montage
Korrekte Montage/Funktionsprüfung
Montagedetail beachten
Kaltwasser
Wasserfl uss
Optional/Zubehör
Verwendungszweck
Einhebelmischer für die Verwendung in Bade-
zimmer und WC.
Technische Daten
– Durchfl uss bei 3 bar Fließdruck:
Einbaumaße, siehe Seite 2.
Installation, siehe ab Bild 1 auf Seite 8.
Trinkwasserleitungen vor und nach der Installa-
tion gründlich spülen (EN 806 und 1717 sowie
DIN 1988 beachten).
Nur neutral vernetzendes Silikon verwenden.
Bedienung, siehe Bild 9 auf Seite 9
Wartung, siehe Bild 10 und 11 auf Seite 9
Montage in umgekehrter Reihenfolge.
– Anzugsmoment Kartuschenmutter:
Ersatzteile mit Bestellnummern, siehe Seite 11.
Hinweise zur Gewährleistung und Pfl ege sind
dem beiliegendem Pfl ege- und Garantiepass
zu entnehmen.
Warmwasser
Kein Wasserfl uss
ca. 7,6 l/min
12-13 Nm
EN
Important information, please read!
These instructions are for both the installer for
installation and the user for operation and main-
tenance of the product. After installation, please
hand them over to the user to keep.
Symbols and explanations
Attention! Warning against bodily injury or
damage to property.
Note, tip or reference
Incorrect installation
Correct installation/test of functionality
Observe installation details
Cold water
Water fl ow
Optional/accessories
Intended use
Single lever mixer tap for use in bathrooms and
WCs.
Technical specifi cations
– Flow at 3 bar pressure:
Installation dimensions, refer to page 2
Installation, refer to picture 1 on page 8
Flush potable water pipes thoroughly before and
after installation (observe EN 806 and 1717).
Use only neutrally netting silicone.
Operation, refer to picture 9 on page 9
Servicing, see refer to picture 10 and 11 on page 9
Assemble in reverse order.
– Cartridge nut torque:
For spare parts with order numbers, refer to page 11.
For warranty and care information please refer
to the attached warranty and care instruc-
tions.
Hot water
No water fl ow
approx. 7.6 l/min
12-13 Nm
3

Werbung

loading