Werbung
Quicklinks
Installation guide
Eng
Guía de instalación
E
Guide d'installation
F
The CU4000 Door Controller reads the
encrypted data contained on the carrier
and allows for updating of the carrier via
SALTO Virtual Network technology, making
it possible to cancel lost or stolen cards
remotely.
It is equipped with input connections that
permit third party readers integration.
CU42E0
T
00
CU42E0
CU42E0
00
G
226g
600g
CU4200
T
00
CU4200
CU4200
G
00
190g
570g
Mechanical Installation
Eng
CU42E0T - CU42E0G - CU4200T - CU4200G - CU42E0T00 - CU42E0G00 - CU4200T00 - CU4200G00
1
TAMPER
Connect!
Note: Follow the same connection model, using the CU tamper input, when using a third party electric box equipped with a
tamper opening detection.
Nota: Seguir el mismo modelo de conexión, utilizando el tamper input de la CU cuando se utiliza una caja eléctrica de
terceros equipada con un tamper de detección de apertura.
Remarque: Suivez le même modèle de connexion en utilisant l'entrée sabotage CU, lorsque vous utilisez un boîtier électrique
d'une tierce partie équipée d'une détection d'ouverture de sabotage.
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
Installation guide
CU4000 Door Controller
Instalación mecánica
E
2
Note: To override the wall tamper, place the jumper in OFF position.
ON
OFF
104
(4-1/8")
44
(1-3/4")
Model: CU4200
Power Input: 12V
-2A (MAX)
DC
12V
Input
B
DC
ON
A
GND
READER 1
12V
Output (1A)
DC
GND
A
B
BUS485
B
A
READER 2
+
TAMPER
-
+
NC
IN1
-
RL1
C
+
NO
IN2
-
NC
+
RL2
C
IN3
-
NO
+
NC
IN4
-
RL3
C
+
NO
IN5
-
NC
+
RL4
C
IN6
-
NO
Ethernet
10Base-T
100Base-TX
©
2022 SALTO Systems S.L.
CU42xx.. series
43
(1-11/16")
10
(3/8")
Installation mécanique
F
1/20
224901-ED.4- 26/06/2023
Werbung
Verwandte Anleitungen für Salto CU4000
Inhaltszusammenfassung für Salto CU4000
- Seite 1 Note: To override the wall tamper, place the jumper in OFF position. All contents current at time of publication. 1/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 2 100Base-TX (2A-30VDC). Use the provided varistor if an inductive load is used. Ethernet connection (only CU42E0). Tamper input to connect the tamper signal from the SALTO electric box or other compatible devices. conectado en paralelo a la entrada del tamper.
- Seite 3 Sortie Data Sortie TX R1=R2 All contents current at time of publication. 3/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 4 Note 5: Si connectique Ethernet All contents current at time of publication. 4/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 5 Cerradero eléctrico Load Power Supply Rojo Rouge Etat de la porte NC SALTO recommends always using an external power supply to operate the load. Bouton poussoir NO Gâche électrique Installation example with RJ45: Ejemplo de instalación RJ45: Exemple d’installation avec connecteur RJ45 :...
- Seite 6 Check that the readers LEDs are ON (READER 1, READER 2). 2. Perform the set up in the software (Consult SALTO ProAccess SPACE user guide). Set up all the CU4200s with their dip-switches and assign the IP address to the CU42E0.
- Seite 7 (sin guardar los cambios) pulsando el botón de CLR durante 5 segundos. 4. Usar el Software de SALTO para detectar el dispositivo consultar el manual de usuario de SALTO ProAccess Software). All contents current at time of publication.
- Seite 8 Vérifiez que les LEDs des lecteurs son allumées (READER 1 et READER 2). 2. Définir la configuration dans le logiciel (Consultez le mode d'emploi ProAccess SPACE SALTO). Configurer toutes les CU4200s en fonction des Dipswitchs et attribuer l'adresse IP à la CU42E0.
- Seite 9 Nombre maximum d'appareils sur un BUS485: 16 unités, avec un maximum de 4 unités CU4200 et 15 unités CU4EB8. All contents current at time of publication. 9/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 10 OFF : le relais est inactif (NC est relié à C) All contents current at time of publication. 10/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 11 Note: To override the wall tamper, place the jumper in OFF position. All contents current at time of publication. 11/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 12 10Base-T Nätverksanslutning (endast CU42E0) 100Base-TX All contents current at time of publication. 12/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 13 D1 utgång TX utgång R1=R2 All contents current at time of publication. 13/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 14 Grün Groen Grön Weiß LOAD Schwarz Zwart Svart Load Power Supply Rood Röd SALTO recommends always using an external power supply to operate the load. Installationsbeispiel RJ45: Installatie voorbeeld RJ45: Installationsexempel RJ45: Optioneel SP224861 Optioneel SP224895 Facultatief Facultatief Valfritt Valfritt...
- Seite 15 Not. 5: När nätverk skall användas All contents current at time of publication. 15/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 16 4.- Prüfen Sie in der ProAccess SPACE Software ob alle Komponenten korrekt erkannt wurden. Hierzu bei Bedarf das Handbuch zu rate ziehen. All contents current at time of publication. 16/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 17 Controleer of de LED bij lezers op ‘ON’ staan (READER1, Reader2). 2. Creëer de CU4200 reeks in de software (raadpleeg hierbij de SALTO ProAccess SPACE gebruikershandleiding. Configureer alle CU4200 met de juiste DIP-Switch instellingen en ken het IP adres toe aan de CU42E0 in de software.
- Seite 18 3.2.3. CU42E0 kommer lämna adresseringsläget automatiskt, men det är möjligt att avsluta adresseringen utan att spara genom att trycka på CLR-knappen i 5 sekunder. 4. Använd SALTO ProAccess mjukvaran för att detektera enheten (Se manualen för instruktioner). All contents current at time of publication.
- Seite 19 Max antal enheter pa BUS485 Är 16st totalt, varav max 4st CU4200 och 15st CU42EB8. All contents current at time of publication. 19/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 20 AV: Reläutgången är inaktiv (NC är ansluten mot C). All contents current at time of publication. 20/20 224901-ED.4- 26/06/2023 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Seite 21 TOLERANCIAS GENERALES FORMA Y POSICIÓN Tabla:TOLERANCIAS GENERALES EN LONGITUD S/ EN 22768-1 MODIFICACIÓN FECHA S/ EN 22768-2 CLASE: m.m. 0.5 - 3 >3 - 6 >6 - 30 >30-120 >120-400 20-09-22 CONECTORES 3M CLASE TOLERANCIAS GENERALES EN LONG. RADIOS, BISELES Y ANGULOS S/ EN 22768-1 CLASE: +/-0,05 +/-0,05 +/-0,1 +/-0,15 +/-0,2...