Fantec MB-X4U31 C 10G Bedienungsanleitung Seite 6

4
Rear Panel
Step
Description
1. 1.
Fan
2.
Security lock
3.
USB-C port
4.
12V DC Input
5.
Central power switch
5
Installation
Step
1. Connect the power cord and turn on the device. Plug in the USB
cable and connect the other end of the cable to your PC.
2. Unlock the door and pull the door handle to open the slot.
3.
Open the door.
4. Slide the hard drives into the case.
5. Close the door and turn on the hard drive by briefly pressing
the respective power button.
6. To remove the hard drive, run in your operating system "Safely
remove hardware", turn off the hard drive by briefly pressing
the switch, open the door and remove the hard drive again.