Herunterladen Diese Seite drucken
PRUNUS 07 Bike Grip User Manual
1
Loosen the screw of both ends with Allen key included.
4
Plug the end cap or something else you want, such
as a mirror, bike bell.
1. If the grips fail or anything misses in the package, please scan this QR code. Then click "Ask a question"
ㅤand log into Amazon to contact us. We will provide you with the best service.
2. You can also send your messages to our customer service e-mail: prunus-technik@hotmail.com
3. America Local Customer Support Number: (805) 712-2661
2
Push the grip to the handlebar until its end is parallel to
handlebar's end.
5
Finish!
Tips: To take out the end cap, it's recommended to
loosen the screw first, then take out.
3
Tighten the screws with Allen key.
Packing
US
CA
UK
loading

Inhaltszusammenfassung für Prunus 07 Bike Grip

  • Seite 1 1. If the grips fail or anything misses in the package, please scan this QR code. Then click “Ask a question” ㅤand log into Amazon to contact us. We will provide you with the best service. 2. You can also send your messages to our customer service e-mail: prunus-technik@hotmail.com 3. America Local Customer Support Number: (805) 712-2661...
  • Seite 2 5. Fertig! Tipps: Um die Endkappe zu entfernen, wird empfohlen, zuerst die Schraube zu lösen und dann zu entfernen.    E-mail: prunus-technik@hotmail.com (antwort in 1 Werktag) Manual de instrucciones de PRUNUS 07 Bike Grip 1. Afloje el tornillo de ambos extremos con la llave Allen incluida.