Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
colour of the LED on the control knob. Are indicated by the color of the LED on the control knob
(please see table below). The levels can be adjusted by briefly pressing the LED control button.
Hint:
If you use the bicycle saddle cover constantly for a longer period of time, please set the lowest
heating level.
This will prevent the skin from overheating.
Heating
Level
High
Medium
Low
Operating and charging the battery
•
Fully charge the battery before using it for the first time and after a long period of non-use.
•
The charger is intended for indoor use only and may only be connected to a suitable
power supply.
•
Use only the original battery supplied with this product.
•
Only use the supplied charger to charge the battery.
•
A damaged battery may no longer be used.
•
Protect the battery from moisture and water.
•
Never touch the charger or the plug with wet hands.
1.
Switch off the bicycle seat cover and remove the battery from the battery bag.
2.
Unplug the connector plug of the bicycle saddle cover from the battery plug socket.
3.
Plug the mains cable of the charger into the mains socket.
4.
Connect the plug of the charger to the charging socket of the battery.
5.
The charging process starts - the LED lamp lights up red.
6.
The charging process stops automatically as soon as the battery is fully charged - the LED
lamp then lights up green.
Notice:
Disconnect the charger from the power supply as soon as charging is finished.
After a period of 3 months without use, the battery must always be fully charged.
Please set an indicator here for particularly important, as above.
10
LED
Heating
range
Red
45 - 55° C
Blue
40 - 45° C
Green
35 - 40° C
appro. battery lifer (depending on outdoor
temperature and usage intervals)
90 Minutes
150 Minutes
180 Minutes
Werbung
Inhaltsverzeichnis
