Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance &
Cleaning
Upholstery daily cleaning:
• Before performing cleaning and maintenance tas-
ks on the treatment table, unplug it from the power
source.
• To ensure an adequate level of hygiene, we recom-
mend cleaning the upholstery after each use.
•Clean at least once a week to maintain the coating
clean and prevent accumulation of dirt and contami-
nants. This will extend the lifespan of your upholstery.
• Clean the entire surface using neutral PH liquid soap
and water in circular motions. To do so, use a whi-
te clean cloth soaked in the cleansing solution and
wring out the wet cloth until all water is removed.
•Avoid excessively wetting the surface of the treat-
ment table. Use a well-wrung cloth.
•Dry the surface using a white and clean cloth.
•Never use solvents, detergents and/or cleaning pro-
ducts that are not pH neutral.
•Never use cleaning tools made of plastic, abrasive
sponges or hard-bristle brushes.
• Important: Lacquers, strong cleaners, xylene-based
solutions, acetone or MEK cause immediate damage
and contribute to the deterioration of the material.
The use of such cleaners is at the owner's risk.
Table frame cleaning:
•Remove dust with a white cloth.
•Use alcohol-free cleaning wipes to clean the structu-
re or simply use a white cotton cloth soaked in a mix
of water with neutral diluted soap and rinse. Dry with
a clean cloth.
Maintenance
Weelko tables have been designed for an intensive
use during long time thanks to their stability, reliability
and durability. However, we advise to keep the table
in perfect conditions and make a correct use of it.
Unplug the table if you will not use it for a long period
of time.
© 2024 Weelko / www.weelko.com / Importer: Weelko Barcelona, S.L. /
Technical
service
Only a technician authorised by Weelko is allowed to
perform any kind of repairs on the bed.
Please contact your distributor or point of sales for
further information on technical assistance.
Technical
Specifications
ACRUM reference
Packaging dimensions
(cm)
Base dimensions (cm)
Gross weight (kg)
Net weight (kg)
Motors
Height (cm)
Backrest angle (º)
Middle section inclination
(º)
Total length (cm)
Total width (cm)
Thickness of upholstery
(cm)
Density
Uphosltery material
Voltage
Frequecy
Maximum power
Duty cycle
Max. liftting capacity:
Hand controller
Foot controller
ESB65397556
Instruction
Manual
2234A.A26
204 x 75 x 60
120 x 63
100
85
3 (height, backrest
and middle section)
55 / 95
-20º ~ + 80°
0º ~ + 20°
200
73 (92 cm with side
armrests)
10
25 kg/m3
White PU
220-240 V
50/60Hz
300W
Max. 2Min ON;
18min OFF
180 kg
HC003 (standard)
FC003 (option)
Instruction Manual.
7
Werbung
