Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
After 5 more seconds the current unit setting is displayed:
5s
MODE
Without further keystroke, the unit switches to Auto-Off Mode after approx. 5
seconds. The last settings are saved.
5.4 Maximum Operation Time
When operating continuously in Cont Mode or Data Logger Mode the unit stays
switched-on, until a selected maximum operation time has elapsed. To set this
maximum operation time, after which the unit is automatically turned-off anyway,
switch the VD81 into Configuration Mode. Therefore the instrument must be
switched-off. Hold the Mode-Key pressed then, until the display shows "rAtE".
Then press Mode-Key several times, until the display shows "hour":
MODE
After 5 more seconds the current setting of maximum operation time is displayed:
5s
MODE
Without further keystroke, the unit switches to Auto-Off Mode after approx. 5
seconds. The last settings are saved.
mbar
Using the Mode-Key you can now select
Torr
"mbar", "Torr" or "hPa".
Using the Mode-Key you can now select a
time span from 1h to 24h or cont (no switch-
off).
35
Werbung
Kapitel
Inhaltsverzeichnis
