Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Disconnect the product from the power source and other equipment if
problems occur.
• Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.
• Children should be supervised to ensure that they do not play with the
product.
• Only power the product with the voltage corresponding to the markings on
the product.
• Do not look directly into the light, this may cause eye damage.
• Disconnect the product before cleaning.
• Do not clean the inside of the product.
• Do not use aggressive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the product.
Installing the product (image B – F)
Make sure the power cable is disconnected from the power outlet.
4
Check what plugs and screws are best suited for the intended surface.
4
PIR sensor control (LLFLP15BLK only)
Use the dials A
456
Dial
Sensitivity dial
A
4
Brightness dial
A
5
Timer dial A
6
to variably control the PIR sensor A
Direction
Clockwise
Counterclock-
wise
Clockwise
Counterclock-
wise
Clockwise
Counterclock-
wise
Description
Increase the sensitivity of the motion
sensor.
Decrease the sensitivity of the motion
sensor.
Increase the maximum environmental
brightness from which the motion sensor
is activated.
Decrease the maximum environmental
brightness from which the motion sensor
is activated.
Increase the product activation time after
detection.
Decrease the product activation time
after detection.
7
3
settings.
Werbung
