Ring Automotive PowerSourcePro Bedienungsanleitung Seite 7

Indicator & Error modes
Power
Overload
Over Temperature
Audible Alarm
Error code
–
Illuminates green to show the unit is switched on and power is available from
the AC output socket(s)
Illuminates red if the units has been overloaded due to excessive current or a
short circuit
Illuminates yellow if the unit has overheated
An alarm sound will be heard if the unit has switched off due to a fault
Description
Normal operation
Battery low voltage
warning
Battery low voltage
shutdown
Battery high voltage
shutdown
Overload shutdown
Over temperature
shutdown
LEDs Inverter
Status
ON
ON
OFF
OFF
OFF
OFF
GB
Action
None
Check for low battery voltage
Check cable connections are
not loose
Reduce load to extend
battery life
Switch inverter off, recharge
battery then switch back on
Check battery voltage is
correct for inverter model e.g.
24volt battery for a 24volt
inverter
Total load exceeded
continuous rating
Startup current exceeded
surge rating
Appliance short circuit fault
Check for adequate
ventilation around inverter
Check inverter cooling fans
are working