Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Functions and features
The encoder transforms rotational movement into pulse sequences.
They allow the measurement of linear distances and angular move-
ments as well as the detection of positions.
• Supply voltage and resolution (pulses per revolution) as indicated on
the type label
• Pulse frequency 300 kHz (5 V version) and 160 kHz (10...30 V version)
• Max. permissible rpm mechanical: 10,000 rpm
• Max. permissible rpm electrical (f
(f
= pulse frequency of the encoder or max. input frequency of
max
the external electronics in Hz; Z = resolution)
• The outputs are protected against a short circuit between the out-
puts and U
Installation
Disconnect power. The drive must not be started during installa-
tion.
angle flange E 60033
Encoder and drive should be connected by means of a flexible coupling
in order to avoid damage to the shaft and the bearing.
In the case of linear measurement with rack and pinion the angle flange
should be mounted on a resilient base. In the case of linear measure-
ment with a measuring wheel encoder and measuring wheel should be
mounted on the end of a flexible arm.
4
or U
for < 60 s.
N
P
/ Z)
60
max
*
reference mark
thread
M3
deep
Werbung
