Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WITH CARRYING HANDLE AND WALL BRACKET
INTERNAL HOSE DIAMETER: 12,5 MM
EXTERNAL HOSE DIAMETER: 18.8 MM
HOSE LENGTH: 15 M
MAX. AIR PRESSURE: 20 BAR
AUTOMATIC COILING AND LOCKING SYSTEM
Please read the Instructions for Use carefully before first use. Incorrect use of the jack can lead to
injury to persons, or damage to property or the product.
S A F E T Y:
•
Only charge the hose with the maximum permissible pressure.
•
Do not allow the automatic coiler to draw the hose onto the coiler at an uncontrolled speed. This
could lead to injury.
•
Regularly check the hose and coiler for damage. Do not connect the hose to the compressed air
system if the hose or the compressed air connections are damaged.
•
Do not use the hose to lift or pull loads.
•
The hose is only designed for being connected to a compressed air system.
•
Never lift the connected compressed air tool so that it is above the hose.
•
Faulty, damaged and worn hoses and connections must be replaced immediately.
•
Keep the hose away from heat and sharp edges and objects at all times.
A S S E M B LY I N S T R U C T I O N S :
•
Screw the carrying handle to the hose coiler as shown using the supplied screws.
•
Fasten the wall bracket to a load-bearing structure as shown. For your safety, it is essential for
the wall bracket be mounted such that it is absolutely firm and secure.
•
Attach the hose coiler to the wall bracket as shown. Next, insert the supplied aluminium pipe
through the fastening holes of the hose coiler and the wall bracket. Secure the pipe so that it
cannot accidentally slide out.
•
The hose coiler is now reliably fastened to the wall and can be swivelled by up to 180° if required.
6
Werbung
