MP Geminos Benutzerhandbuch Seite 5

Geminos (T) is unlocked; slowly close the top display into clamshell mode.
•
Connect to Geminos (T)
There are three ways to connect Geminos via USB-C and/or HDMI. When setting up,
treat Geminos as two separate monitors.
HDMI + HDMI
Take the two HDMI cables and plug them into the side of your computer and the
•
back of your monitor—one connection where it says "Top" and one where it says
"Bottom."
USB-C + USB-C
Take the two USB-C cables and plug them into the side of your computer and the
•
back of your monitor-one connection where it says "Top" and one where it says
"Bottom."
Disclaimer: This only works if you have two display-enabled USB-C ports.
•
HDMI + USB
Use the HDMI cable to plug into the computer and into the back of the monitor,
•
specifically in the "Top" port.
Then connect USB-C into a display port-enabled USB-C port and connect the
•
other end into the "Bottom" port of the monitor.
Note: Webcam, speakers, and hub will only work with methods 2 and 3. For method 1,
you will need an additional USB display.
Drivers
There are two ways to connect Geminos via USB-C with a driver. Begin by heading over
to our website www.mobilepixels.us
Download the Geminos driver for your device—Windows or Mac.
Windows Driver
After downloading and installing the driver, restart your device.
•
Once restarted, use the USB-C cable marked with the red ribbon to connect to
•
the device and then to the "Bottom" display port on Geminos.
Tip: If Windows does not pop up after the driver has downloaded, find the driver in your
folder.
and clicking on the driver at the top of the screen.
5