Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
"Quick Install Guide"
♦ ♦ Compex MicroHub
Ethernet Hub (TP1006C);
♦ ♦ Compex MicroHub
Ethernet Hub (TP1008C);
♦ ♦ Compex MicroHub
BNC/AUI/Fiber Optic**
Ethernet Hub (TP1016C/ TP1016F**)
± ±
Introduction
®
The Compex MicroHub
/8 (TP1008C); Compex MicroHub
®
MicroHub
/16; (TP1016C/ TP1016F) are multi-port Ethernet hubs that bring unmatched
flexibility to LAN environments. There are multi-wiring connections for up to 6 (TP1006C);
or 8 (TP1008C); or 16 (TP1016C/TP1016F) UTP ports. In addition, there is: a BNC
(TP1008C); or a BNC/AUI (TP1016C); or a Fiber Optic (TP1016F) port for easy, direct
connection to different LAN media segments. The TP1006C/TP1008C;/ TP1016C/TP1016F
hubs constantly monitor each port for signal quality and will automatically disconnect a device
producing noise or excessive collisions.
automatically when the error condition is cleared.
± ±
Hub Features
(see diagrams on inner cover)
Power LED
Collision LED
Link/Activity LED
(TP1006C/TP1008C/TP1016C/
TP1016F)
Jabber LED
(TP1016C/TP1016F)
Uplink Button
(TP1016C):
(TP1006C/TP1008C):
6
;
RJ-45 Ports (TP1006C)
8
or
RJ-45 Ports (TP1008C)
16
RJ-45 Ports (TP1016C/F)
1
1
-1
BNC;/
BNC
AUI;/
1
-1
Port;
BNC
Fiber Optic
DC Power Socket
/
;
(TP1006C/TP1008C)
AC Power Socket
(TP1016C/ TP1016F)
ON/OFF Power Switch
(TP1016C/TP1016F)
English
Compex MicroHub
Compex MicroHub
Compex MicroHub
®
/6, 6-Port RJ-45
®
/8, 8-Port RJ-45 + BNC
®
/16, 16-Port RJ-45 +
®
/6 (TP1006C); and Compex
The disconnected device will be reconnected
♦ ♦ ON indicates hub is receiving power.
♦ ♦ BLINKS to indicate collision of transmitted
packets occuring.
♦ ♦ STEADY LIGHT indicates a good cable link
between adapter and hub;
♦ ♦ BLINKS to indicate network activity present.
♦ ♦ BLINKS to indicate transmission of packet/s
exceeding the specified time.
♦ ♦ Uplink mode when button is released OUT.
♦ ♦ Uplink mode (button shift Left).
♦ ♦ Configurable as 6; /8; / 16
UTP ports
15
plus 1
UTP ports
UTP Uplink Port
♦ ♦ BNC or AUI or Fiber Optic for connection to a
different LAN media segment.
♦ ♦ Jack for connection to an external Output
Power adapter (DC 7.5V @ 1 Amp);
♦ ♦ Flexible power input (range 90VAC to
250VAC) meets every country requirement.
♦ ♦ Provides a convenient means to power-up or
shutdown the hub.
®
/6 (TP1006C);
®
/8 (TP1008C);
®
/16 (TP1016C/ TP1016F)
or 5; /7; /
(
#1).
Port
1
Werbung
