Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. PMM Anleitungen
  4. Autozubehör
  5. 12126
  6. Montageanleitung

PMM 12126 Montageanleitung

Vorschau ausblenden
1
2
3
4

Quicklinks

Diese Anleitung herunterladen
Power Windows
Leve-glace Electrique
Elektrische Fensterheber
Elevalunas Electricos
Máquina de vidro elétrico
Alzacristalli Elettrici
Pour / For
A udi
Audi A6 (9/1997>3/2004)
Solo meccanismo per motori originali con elettronica /
Mechanical part only. Replaces window regulator already
provided with original motor with electronic box
LH 4B0839461
R H 4B0839462
LH Solo m e ccanismo
R H Solo m e ccanismo
LH Me chanical part only
R H Me chanical part only
>
THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.
CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.
DIESE MONTAGE-ANLEITUNG IST FÜR DIE BEIDE LINKE UND RECHTE SEITE.
ESTA INSTRUCCION DE MONTAJE ES PARA LOS DOS LADOS IZQUIERDO Y DERECHO.
ESTAS INSTRUÇÕES VALEM TANTO PARA O LADO ESQUERDO QUANTO PARA O DIREITO.
LA PRESENTE ISTRUZIONE VALE SIA PER IL LATO SINISTRO CHE PER IL LATO DESTRO.
12126
loading

Verwandte Anleitungen für PMM 12126

Inhaltszusammenfassung für PMM 12126

  • Seite 1 Power Windows Leve-glace Electrique Elektrische Fensterheber Elevalunas Electricos Máquina de vidro elétrico Alzacristalli Elettrici 12126 Pour / For A udi Audi A6 (9/1997>3/2004) Solo meccanismo per motori originali con elettronica / Mechanical part only. Replaces window regulator already provided with original motor with electronic box...
  • Seite 3 AD702 8- 10- 2012 ENGLISH ENGL ISH THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. A) Remove door trim. Remove the inside door trim, complete with glass and window regulator. Unclamp the glass from the window regulator to replace. Detach the window regulator from the panel. Drill into position 1 (ø 6 mm.). B) Fix the power window rail onto the panel into the original positions 1 and 2 and the motor plate into position 3 (positions 1 and 3 with the rivets supplied) (photo B).
  • Seite 4 C) Rimontare il pannello interno completo di vetro e alzacristalli in portiera. Togliere la fascetta di ritenuta rocchetto e le tre viti dalla piastra motore (foto A). D) Inserire le rondelle sotto la testa delle viti fissaggio motore. Inserire il motore nei punti n° 4, 5 e 6 fissandolo con le tre viti in dotazione.