Reset Bios To Default Configuration - TCi A15-FLAT Handbuch

3.2 Reset BIOS to default configuration

If you set the BIOS configuration to "default" or "optimized", the following settings have
to be effected before saving:
BIOS: BIOS: BIOS: BIOS:
PowerOn after PowerFail: ON
This setting ensures system's restart - without pressing On/Off - after a power outage has
occured.
Systems which use LVDS interrupt for TFT control have to be configurated depending
on display diagonal:
15" TFT
19" TFT
If this setting has not been effected, it can only be made up by an additional display connected
on the external VGA interrupt.
Ludwig-Rinn-Str. 10-14
1024 x 768
1280 x 1024
D - 35452 Heuchelheim
24Bit
48Bit
Phone: +49-(0)641-96284-0 Fax: +49-(0)641-96284-28 www.tci.de
Seite 11 von 24