Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the REM-RB200CM IP.
•
ALWAYS:
•
Take environmental aspects into account when using outdoors. The performance or structural integrity of
LED video panels and rigging hardware may be affected by sunlight, rain, or especially, wind.
•
Consult with a professional structural engineer for any Temporary Demountable Structure (temporary
indoor or outdoor stage) designs to ensure this product can be used safely in each application.
•
DO NOT:
•
Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
•
Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not
limited to:
•
Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
•
Locations that are prone to flooding or being buried in snow.
•
Other areas where the product will be subject to extreme radiation or caustic substances.
•
In the event of a serious operating problem, stop using immediately.
What is Included
•
REM-RB200CM IP
•
4x Clamp attachment brackets (DRB-CTC)
•
4x Clamp bolts for TRUSST CTC-50HC
•
Quick Reference Guide
Mounting
Before mounting this product, read the
weight of the products.
Mounting Diagram
Alignment
conical (x8)
1
QUICK REFERENCE GUIDE
Safety
Notes. Make sure the mounting hardware is capable of supporting the
Latch (x9)
Receiver (x6)
Ground Support 2 Kit)
Tightening
knob
(For use with
Rig Bar Latch
Spring
knob
Locking
bar
REM-RB200CM IP QRG Rev. 3
Werbung
