as-Schwabe Acculine Multi Bedienungsanleitung Seite 6

Transform Adaptor
18V
(Red)
Voltage Switch
Voltage Switch
14.4V 18V
When the battery is inserted into the light. Red indicator on. After 5S red indicator off.
2.1.2 Choose the right battery voltage
18V Battery
The default battery voltage is 18V.
The voltage indicator is red.
Transform Adaptor
18V
(Red)
Voltage Switch
If the voltage selected differs from that of the inserted battery, this can lead either to a reduction in the
light output or to the battery discharging more quickly.
2.1.3 Press the switch to turn on the light
3 SAFTEY INSTRUCTION
3.1 Saftey Instruction
• DO NOT use the worklight if you suspect it has been damaged.
• DO NOT cover the battery while charging.
• DO NOT cover or block the lense during use.
• DO NOT allow children to use the worklight.
• DO NOT use if the light is damaged.
• DO NOT tamper with the battery pack or wiring.
• The battery pack is protected against overcharging, deep discharging and over current.
• The battery pack should only be charged in an ambient temperature of 0°C to 45°C
• The work light should only be used in an ambient temperature of -10°C to 45°C.
3.2 Maintenance
• DO NOT clean the work light with solvents.
• Store in a clean dry area when not in use.
• Check all cables etc. for damage before use.
as - Schwabe GmbH · Merkurstr. 10 · D-72184 Eutingen ·
14,4V
(Green)
18V 14,4V
14,4V
(Green)
18V 14,4V
Red indicator is for 18V.
Green indicator is for 14.4V.
The default battery voltage is 18V.
Remove the battery and the adapter enters
the initial state.
14.4V Battery
Hold down Voltage Switch 2 seconds.
Please make sure the voltage indicator is green.
Transform Adaptor
18V 14,4V
(Red) (Green)
18V 14,4V
www.as-schwabe.de