Beamz LCB216 LED Colorunit 12x18W 6-1 RGB Gebrauchsanleitung Seite 8

InFr
IR Remote controller introduction
BLACK OUT : setting On / Off (return the present program)
DMX : Press DMX mode, setting DMX address from the digits
button. Example setting adress 017, press DMX, press 0,
press 1 and press 7.
COLOR : Press color setting mode, setting different color from the
COLOR button.
SOUND : Press SOUND mode, setting different sound mode from
the digits button.
SPEED : Press SPEED mode, setting different speed mode from
the digits button mode only uses under AUTO or SOUND
mode. And no fit for the other mode.
FLASH : Press FLASH mode, setting different FLASH mode from
the digits button 1 to 10 digits.
DIMING MODE : Press
With 255 different levels for all color.
10CH
Ir-0
Ir-1
= Up or = Down setting brightness
10-channel DMX mode
OFF receive IR remote signal.
ON receive IR remote signal.