Werbung
Verfügbare Sprachen
Verfügbare Sprachen
manufacturers. It is recommended to provide an
independent power adapter for each device as
adapter overload may cause over-heating or a fire
hazard.
System Security
Please understand that you have the responsibility to
configure all the passwords and other security
settings about the device, and keep your user name
and password.
Maintenance
If the product does not work properly, please contact
your dealer or the nearest service center. We shall
not assume any responsibility for problems caused by
unauthorized repair or maintenance.
A few device components (e.g., electrolytic capacitor)
require regular replacement. The average lifespan
varies, so periodic checking is recommended. Contact
your dealer for details.
Cleaning
Please use a soft and dry cloth to clean the interior
and exterior surfaces. Do not use alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that
the device lens is not exposed to the laser beam, or it
may burn out.
Do not aim the lens at the sun or any other bright
light.
To avoid heat accumulation, good ventilation is
required for a proper operating environment.
DO NOT expose the device to extremely hot, cold,
dusty, corrosive, saline-alkali, or damp environments.
For outdoor devices, the working temperature shall
be -30°C to 65°C (-22°F to 149°F) and the working
humidity shall be lower than 90%. For indoor devices,
the working temperature shall be -10°C to 50°C (-14°F
to 122°F) and the working humidity shall be lower
than 90%.
DO NOT expose the device to high electromagnetic
radiation.
Illuminator
Make sure that there is no reflective surface too close
to the device lens. The light from the device may
reflect back into the lens causing reflection.
The beam of the light at the distance of 200 mm is
classified as Risk Group 1 (RG1). The minimum safe
distance is approximately 500 mm away from the
device.
Possible hazardous optical radiation emitted from this
product. DO NOT stare at operating light source. May
be harmful to the eyes.
If appropriate shielding or eye protection is not
available, turn on the light only at a safe distance or
in the area that is not directly exposed to the light.
When assembling, installing or maintaining the device,
DO NOT turn on the light, or wear eye protection.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Time Synchronization
Set up device time manually for the first time access
if the local time is not synchronized with that of the
network. Visit the device via web browser/client
software and go to time settings interface.
L'image du produit est donnée uniquement à
titre de référence et le produit réel peut
présenter un aspect différent.
Symboles et repères (Page 2 – A)
1. Attention
2. Avertissement
3. Interdit
4. Correct
5. Incorrect
6. Revenez à l'étape A et continuez.
7. Pas nécessairement inclus. /Nombre variable
d'accessoires. /Ignorez cette étape si elle n'est pas
nécessaire.
8. Carte microSD
9. Mise à la terre
10. Mise au rebut
11. À acheter séparément
12. Matériel résistant à l'eau
13. Options possibles
14. Autres options
Interface (page 5 – B)
① Logement pour carte mémoire
② Interface réseau
③ Interface BNC
④ Interface RS-485
⑤ Interface d'alimentation
⑥ Interface audio
⑦ Sortie d'alarme
⑧ Entrée d'alarme
⑨ Interface fibre optique
Installation (page 10 – C)
Sortie d'alarme (page 14 – D)
① Sortie relais
② Chargement CC
③ Alimentation
④ Relais JQC-3FG
17
Français
Werbung
