Herunterladen Diese Seite drucken

sunfun SERA Aufbauanleitung Seite 3

Werbung

Object Placement
Avoid leaning on the pavillon or placing objects against it during assembly.
Proper Use
The pavillon should be used appropriately and in accordance with its intended purpose.
WARNING: Improper handling may cause injury to the user or nearby individuals. Observe
the following precautions:
Adjusting Roof: Do not adjust the roof while people are sitting underneath the pavillon.
Always clear the area before making any adjustments to prevent potential injuries.
Snow Clearance: Regularly clear snow from the pavillon during winter months.
Weather Damage: We cannot accept liability for damage resulting from adverse
weather conditions.
Roof Weight: Do not place heavy objects on the roof. Regularly clear the roof of debris,
snow, or standing water.
Screw Tightening: Regularly tighten all screws.
Cleaning: Clean the pavillon with a soft cloth, warm water, and mild soap.
Water Prevention
Regular Check: Regularly check for the formation of water pockets, especially after
rainfall.
Proactive Measures If you observe water accumulation, carefully remove them.
Avoid using sharp objects that may scratch or damage the roof panels.
Panel Angle: Ensure the roof panels are always positioned at the correct angle to
promote water runoff. A properly angled roof discourages water from collecting.
Drainage: Consider options to improve drainage from the roof, such as installing
additional guttering or downspouts. Remember, failing to address water accumulation
can lead to severe damage to your pavillon and void any warranty you may have.
3
Assembly Steps
After you've read through the general instructions, warnings, and precautions, you
can begin the assembly process.
Follow these steps for a successful pavillon assembly:
Preparation: Clear and level the area where you plan to install the pavillon. Gather all
necessary tools and components.
Base Setup: Follow the manufacturer's instructions to set up the base of the pavillon.
Make sure the base is stable before proceeding.
Frame Assembly: Assemble the pavillon frame as instructed in the manual.
Roof Installation: Once the frame is secure, install the sliding roof. Ensure the slides
are functioning smoothly and that the panels are installed at the correct angle to
facilitate water runoff.
Secure the Pavillon: After the assembly is complete, secure the pavillon to the ground
using anchors or weights as recommended by the manufacturer.
Final Check: Conduct a final check to ensure all screws are tightened and the pavillon
is stable.
Maintenance and Care
Regular maintenance is key to extending the lifespan of your pavillon. Follow these tips:
Clean Regularly: Wipe down the frame and panels with a soft, damp cloth.
Check for Damage: Regularly inspect your roof for any signs of damage or wear.
Address any issues immediately.
Sliding Mechanism Maintenance: Regularly check the sliding mechanism for smooth
operation. Lubricate if necessary.
Secure the Structure: Ensure that your pavillon is securely anchored at all times.
Check the anchoring system regularly and tighten if necessary
Winter Care: If you live in a region with harsh winters, consider removing the panels
and storing them indoors to protect them from heavy snow and winds.
Remember, proper maintenance can greatly extend the life of your pavillon and keep
it looking great for years to come.
4

Werbung

loading

Diese Anleitung auch für:

23617364