Ashdown Engineering FUNK FACE II Benutzerhandbuch Seite 4

ASHDOWN ENGINEERING - FUNK FACE II
REAR PANEL
JACK INSTRUMENT INPUT
JACK OUTPUT
POWER SUPPLY
15-18v Centre Pin Negative Power Supply input.
Weights and Dimensions
H: 65mm / 2.56"
W: 116.20mm / 4.57"
D: 145.50mm / 5.72"
Kgs: 0.90
Lbs: 2
FUNK FACE II
USER GUIDE
SPECIFICATIONS:
INPUTS
Input
Power Supply
2.1mm Plug 9V Centre pin NEGATIVE @ 100 mA.
Best results will be obtained with a LINEAR regulated supply ( ie transformer type ),the
use of switching type adapters may lead to the introduction of unwanted noise.
IMPORTANT! Use correct POLARITY Power Supply, the use of the wrong power supply
will invalidate the warranty and repairs required due to the use of the wrong supply may
incur a charge.
Impedance - 3.9M ohms Input impedance 100k
USER GUIDE