Sygonix 2903439 Bedienungsanleitung Seite 3

Operating Instructions
Power strip, 1.5 m
Item No. 2903439 (white)
Item No. 2903440 (black))
1 Intended use
This product is a power strip.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks, or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery content
1x Power strip
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric
shock.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
5.2 Operating environment
Only use in dry rooms.
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
5.3 Operation
Completely unwind the mains cable before use.
This power strip must be connected directly to a mains outlet. Do not use adapters.
Do not connect the power strip in series with other power strips or extension cords.
Do not cover the product with any item during use.
Do not overload the product! Overloading can trip the circuit breaker, or dangerously
overheat the product and circuit and cause an electrical fire.
Consult an expert when in doubt about the operation, safety or connection of the product.
1x Operating instructions
www.conrad.com/downloads or scan the QR code
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.4 Handling
Do not touch the product with wet hands.
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
5.5 Mains cable
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
The mains outlet must be located near to the device and be easily accessible.
Never plug in or unplug the mains plug when your hands are wet.
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
Unplug the mains plug from the mains socket if you do not use the device for an extended
period of time.
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress.
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged
mains cable can cause a deadly electric shock.
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker)
and then carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
Ensure that cables are not pinched, kinked or damaged by sharp edges.
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
5.6 Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
5.7 Sockets
The product is equipped with an enhanced protection against accidental contact. An
integrated mechanism will release the holes of the receptacle only if the two prongs of a
power plug are inserted into the two holes at once.
6 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Turn off and unplug all devices connected to the product.
2. Disconnect the product from the mains outlet.
3. Clean the product with a dry, fibre-free cloth.
4. Keep the product free of dust or dirt accumulation.