Haier I-MASTER 5 Serie Benutzerhandbuch Seite 8

GB
5. Cleaning & Maintenance
RISK OF ELECTRIC SHOCK!
Always unplug the appliance from the power
outlet before performing maintenance tasks.
WARNING:
• Never immerse the device in water or place
in a dishwasher.
• Do not steam-clean the appliance.
Cleaning
1. Clean the outside of the kettle and base
with a damp cloth.
2. Do not use strong or abrasive cleaning
agents.
3. Remove the limescale filter, soak it in a
little vinegar, then rinse clean with clean
water.
4. To refit the filter, slide into place, until it
snaps into location.
Descaling
Regular descaling make your kettle last longer,
ensure proper functionality and will save energy.
The ideal frequency to descale depends on
water hardness.
We recommend to use Care Plus Protect
Professional Kettle Descaler.
Follow the manufacturer's instructions for use
and frequency.
Descaling the kettle with vinegar:
1. Fill the kettle with water up to the 1.7L
mark and bring to a boil.
2. Add a small amount of white vinegar and
let it sit for several hours.
3. Rinse the kettle and the limescale filter
with clear water.
Important: never use hard objects to remove
limescale residue as this will damage the seal.
6. Troubleshooting
The kettle does not heat to the desired
temperature and the temperature indicators on
the base control panel are not illuminated.
- The overheat control has tripped during dry
heating (not enough water).
• Let the kettle cool down (approximately 12
mins), remove the kettle from the base and
fill with cold water.
The base unit switches off before the heating
cycle is complete.
- The kettle contains too much scale.
• Descale the kettle as per the instructions
The kettle 'beeps' and all lights flash for 5
times.
- The kettle temperature sensor is not working.
• Restart the appliance to attempt reset.
• If problem persists after reset, unplug
the appliance from the power outlet and
contact Customer Service.
7. Technical data
Electrical connection 220-240V~ 50/60Hz
Power UK
Power Europe
8. Important information
Haier Spares and Consumables
Always replace parts with genuine Haier spares.
These are available from your local Haier dealer
or direct from Haier. When ordering parts
always quote your model number.
Quality
Haier's factories have been independently
assessed for quality. Our products are made
using a quality system which meets the
requirements of ISO 9001.
Your Guarantee
The guarantee conditions for this appliance are
as defined by our representative in the country
in which it is sold. Details regarding these
conditions can be obtained from the dealer from
whom the appliance was purchased. The bill of
sale or receipt must be produced when making
any claim under the terms of this guarantee.
8
2520-3000W
1850-2200W