Herunterladen Diese Seite drucken

Radius BOOKSBAUM MAGAZIN STAND 738 Montageanleitung

Werbung

BOOKSBAUM MAGAZIN STAND
ART. NR.: 738
1
2
1.
2.
3.
3
1.
2.
4
5
All manuals and user guides at all-guides.com
DEUTSCH
herzlichen glückwunsch zum kauf
ihres booksbaums.
benötigte personen für den aufbau:
2
stecken sie die schrauben durch die
verbindungsplatte. die verbindungs-
platte ist nicht immer gleichfarbig.
der fuss kommt zwischen pfosten
und verbindungsplatte. schrauben
sie den pfosten an den standfuß des
regals.
1. entfernen sie die klebe
schutzfolie.
2. kleben sie das kunststoff-
teil unter den standfuss in
jede ecke eins und zwei in
die mitte des fußes.
3. pressen sie das graue
kunststoffteil in das
schwarze wie gezeigt,
bis es hörbar einrastet.
hängen sie die regalböden wie
abgebildet ein.
1. führen sie den kürzeren
haken bis zum anschlag
komplett ein.
2. lassen sie den boden nach
unten klappen.
hinweis:
langer haken unten, kurzer oben.
wenn sie die regalböden eingehängt
haben, werden sie feststellen, dass
diese minimal nach oben zeigen, um
dem gewicht der bücher entgegen
zu wirken.
danke, dass sie sich für ein produkt von radius
design entschieden haben. weitere produkte
finden sie unter:
www.radius-design.com
ENGLISH
congratulations on your purchase of
the booksbaum.
number of persons for the installa-
tion: 2
put the screws through the connec-
ting plate. connecting plate is not
always the same color.
the foot is to be positioned between
the pole and the connecting plate.
screw the pole to the pedestal of the
shelf.
1. remove the adhesive pro
tection film.
2. tack the plastic part
under the standing foot;
one in each corner and
two in the middle of the
foot.
3. pushing the gray plastic
part in the black as
shown, until it clicks into
place.
mount the shelves as shown in the
picture.
1. insert the upper hooks up
to the stop.
2. let shelf flap downwards.
note:
long hook at the bottom,
short at the top.
once you have mounted the shelves
you will notice that they are slightly
pointing upwards in order to coun-
teract the weight of the books. if
required, the shelves can also be
bent downwards.
thank you for choosing a product from radius
design. you can find further products at:
www.radius-design.com
1/2

Werbung

loading

Inhaltszusammenfassung für Radius BOOKSBAUM MAGAZIN STAND 738