Motorola S1201 Schnellstartanleitung Seite 5

1. Plug the power adaptor into the socket marked
charger and plug the other end into the wall socket.
2. Remove the battery cover from the back of the handset and insert the
2 x AAA NiMH rechargeable batteries supplied. Please note the '+' and
'-' markings inside the battery compartment and insert in the correct
direction.
3. Clip the battery cover back into place.
4. If you are charging the batteries for the first time, place the handset on the
charger to charge for at least 24 hours continuously.
5. When the handset is fully charged, the
display. The display will show the HANDSET name and handset number
to indicate that it is registered to the base.
Important
Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA
Ni-MH 450mAh rechargeable batteries) supplied with your S12.
Getting started
on the rear of the
icon will appear steadily on the
5