Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TV simuIator TV 200
Intended use
Your TV simuIator simulates your presence at home and deters burglars. The
prerequisite for use as intended is the
proper installation as well as observance of and compliance with the instructions in
this operating manual.
Any use other than that described in the intended use is considered improper.
Unauthorised modifications or conversions are not permitted and will result in
damage to your TV simulator.
Safety instructions
Protect yourself from physical damage and follow the instructions!
WARNNUNS! Danger due to unsuitable power supply units!
There is a risk of electric shock if unsuitable mains adapters
are used! Only use the power supply unit supplied.
WARNING! Choking hazard! Children can swallow small
parts, packaging or protective films. Keep children away
from the product and its packaging!
WARNUNs! Danger of injury to the eyes! The light produced
by the illuminated displays on the front of the TV simuIator is
very bright. Do not look directly at the illuminated displays on
the front of the TV simuIator when the TV simuIator is
switched on.
Package contents
Check the contents of the packaging of your TV simulator before you start
using it. If anything is missing or damaged, contact our service department.
TV SimuIator
USB cable
Operating instructions
Overview
The illustrations above show you your TV simuIator in detail.
1
Luminous displays (coloured)
2
Holes for the wall bracket
3
Stand
4
Connection socket for USB cable
5
Twilight sensor
6
Function switch
Connect power supply unit
Your TV simuIator is powered by the USB cable supplied.
Connect the power supply unit to the connection socket on
the back of your TV simulator and to a properly installed
socket.
6
5
4
Set up TV simuIator
Place your TV simuIator in any location. We recommend that you place the
front facing a window for the best simulation effect.
Note that external light influences such as car headlights on a busy road or bright
street lighting can affect the function of the twilight sensor.
Switch on the TV simuIator
Switch on your TV simuIator to create a deceptively real light image. When
looking into your window, a burglar will be deterred by the pretend TV.
Permanent operation
Slide the function switch to On. Your TV simulator is permanently switched on.
Your TV simulator does not switch off automatically in this mode. If you want
to avoid unnecessary power consumption
If you do not want to use your TV simulator, use the timer
function or switch it off.
Operation with timer
The integrated twilight sensor detects when it gets dark and automatically
switches on your TV simuIator. Set how long you want your TV simuIator to be
on. Your TV simuIator can be operated with the timer 4 or 7 hours automatic.
Slide the function switch to the desired time. Your TV simuIator switches on
automatically as soon as it gets dark (illuminance <30 lux).
Switch off TV simulator
Press the button on the back until the display shows the number 0. Your TV
simulator is switched off.
If you want to avoid unnecessary power consumption and do not want to use your
TV simuIator, unplug the power supply unit of your TV simuIator from the
Outlet.
Care instructions
Clean the surface of the housing regularly with a soft, lint-free cloth. Do not
use any cleaning agents or solvents.
1
Disposal
Find out about the possibilities of taking back old appliances
and used batteries free of charge from your dealer.
2
The symbol opposite means that, due to legal regulations,
3
oldelectrical and electronic equipment must be disposed of
separately from household waste. Dispose of your
The waste can be disposed of at the collection point of your
local waste disposal authority.
Note the labelling of the packaging material when separating
waste, these are marked with abbreviations (b) and numbers (a)
with the following meaning: 1-7: plastics / 20-22: paper and
cardboard / 80-98: Composites.
Dispose of packaging materials according to local regulations.
The Triman logo is only valid for France.
The logo is only valid for Italy.
Warranty
The warranty period is 24 months. The guarantee period starts from the date of
purchase. Be sure to keep the proof of purchase and the original packaging.
Should a problem occur, please use our returns portal (RMA) at
http://www.oIympia-vertrieb.de/de/supporUservice-retourenmanagement.html
If you have any further questions, please do not hesitate to contact our hotline on
0180 5 007514 (costs from the German landline network at the time of going to
press: 14 ct/min, maximum 42 ct/min from the mobile network).
A return is made by enclosing the purchase receipt and ideally in the
original packaging to:
WSG Wilhelmshavener Service Gesellschaft mbH
Krabbenweg 14
26388 Wilhelmshaven (Germany)
Technical data
Weight
approx. 189 g
Dimensions (W H D)
80 x 120 x 40 mm
Power supply
Input: 230 V, 50 Hz, 5 VDC, 600 mA
Output: 5 V, 600 mA
Power consumption
approx. 3 W
permissible ambient
-10 °C to +40 °C at
conditions
30 % to 75 % humidity
permanently on, timer (4 or 7 hours)
Operating modes Light
indicators (LED)
12, multicoloured
Version 01 2023
Art. 5930
Werbung
