Werbung
English
1 Connect to a Computer
A. Unplug the power cable and remove the case panel.
B. Locate an available PCI(-E) slot and carefully insert the adapter.
Note: For some models, a low-profi le bracket is provided. You can replace
the standard-sized bracket with the low-profi le one if needed.
C. Connect the antennas to the adapter directly.
Note: If the adapter has the base, install the antennas on the base and
connect the base to the adapter (recommended).
D. Replace the case panel, plug in the power cable and turn
on your computer.
2
2 Install Driver
A. Insert the CD and run the Autorun.exe.
Note: You can also download the driver from this product's Support page at
www.tp-link.com.
B. Select your adapter and follow the instructions to complete
the installation.
Note: If you can't install the driver successfully, disable the antivirus software
and fi rewall, then try again.
3 Join a Wireless Network
A. Click the network icon (
B. Select your Wi-Fi network, click Connect, and enter the
password when prompted.
For detailed instructions, please refer to the User Manual from this product's
Support page at www.tp-link.com.
or
) on the taskbar.
Werbung
