Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RESI-T8-D-CM
RESI Informatik & Automation GmbH, Altenmarkt 29, A-8551 Wies, Austria, Tel: +43-316-262062-0, Fax: +43-316-262062-66, Email: help@RESI.cc URL: www.RESI.cc
IMPORTANT: Before you start with the installation of the product, read the attached IMPORTANT SECURITY NOTES very carefully and follow all the herein given information very accurate!
Use our configuration software based on LIBRE OFFICE (R) to try out and test the module!
CLAMPS:
L+,M-
Power supply
L+: 12-48 V=
M-: Ground
RS232#1
LINUX device PDEV0
TX,RX,M-
RS232 ASCII or MODBUS/RTU interface
TX: RS232 transmit signal
RX: RS232 receive signal
M-: RS232 ground signal
RS232#2
LINUX port PDEV1
TX,RX,M-
RS232 ASCII or MODBUS/RTU interface
TX: RS232 transmit signal
RX: RS232 receive signal
M-: RS232 ground signal
RS232#3
LINUX port PDEV2
TX,RX,M-
RS232 ASCII or MODBUS/RTU interface
TX: RS232 transmit signal
RX: RS232 receive signal
M-: RS232 ground signal
ETHERNET
ETHERNET connection for network or Internet access
10M/100M/1000Mbit
USB
USB ports of Raspberry PI
CAUTION
USB port 4 (marked with N/A) is used internally!
DO NOT CONNECT USB DEVICES HERE.
THIS CAN DESTROY THE DEVICE!!
LINUX
IP address
IP mask
SSH console
Username
password
Technical Information
Operating temperature
Storage temperature
Humidity
Power supply:
Power consumption:
Terminals
Dimensions (LxWxH)
Weight:
Housing:
Mounting:
Certification:
TARIC number:
EN
192.168.0.10
255.255.255.0
root
r4Cs!#
0..+60°C
-20..+80°C
25..90%r.H. not condensing
12-48V=
15.0W
Terminal type RM5
Cable cross section: max. 2.5 mm², max. 14AWG
Screw: M3
Tightening torque: max. 0.5Nm, max. 4.43 Lb-in
Terminal type RM3.5
Cable cross section: max. 1.5 mm², max. 16AWG
Screw: M2
Tightening torque: max. 0.2Nm, max. 1.77 Lb-in
72x90x62mm
190g
4MU
DIN EN50022 rail or wall mounting
CE
8538 90 91
Werbung
