ZEITRAUM TURNTABLE Aufbauanleitung Seite 2

TURNTABLE
(to d 140 cm)
assembly instruction 11/23
TOOLS REQUIRED:
socket wrench
1x screw nut (M10)
1x snap ring
1x flat washer
1x threaded rod (M10)
1. Place the tabletop upside down on a blanket and
screw in the threaded rod.
4. Place the flat washer...
7. Tighten the screw nut with the socket wrench
just a little.
ZEITRAUM GmbH · Äußere Münchner Str.2 · D-82515 Wolfratshausen · Tel +49 (0)8171 - 418130 · Fax +49 (0)8171 - 418141 · info@zeitraum-moebel.de · www.zeitraum-moebel.de
Please assemble the table on a soft surface (e.g. a carpet or blanket) to avoid damages.
2. Place the tableleg on the threaded rod.
5. Then the snap ring...
8. Ensure that the wood grain of the table top
matches the tablefoot.
3. Insert the tenon into the drilling in the tab-
letop. Take care the adhesion disc lays flat.
6. ... screw in the screwnut.
9. Tighten the screw nut with the socket wrench
properly.
Please note: In order to change the position of
the table, do not rotate the tabletop. Please lift
the table! Otherwise the tableleg may split.