Lock/Unlock The Screen (Sleep Mode); Using A Memory Card - Modecom Freepc Bedienungsanleitung

FREEPC
2.2.2 Turn off
To power off your device, press the sidebar "Settings",
next "Power" and"Shut down"
2.3 Lock/unlock the screen (sleep mode)
To save energy, you should put your device in sleep
mode by turning off the display mode. To do this, shortly
press the power key. Press it again to wake up the display.
2.4 Connect the device to a display device
Connect the device to a TV, monitor or projector.
3. Using a memory card
3.1 Insert the micro SD memory card to the device
* The device supports micro SD cards in standard SD
/ SDHC
* To insert the card, set the connector tab toward the
back of the unit (printed toward the front of the unit)
* To remove the card, press the edge of the card to re-
lease the card to release the safety and pull the card out
of the slot