Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
ENGLISH
1.4 Cabling
The most common problem associated with Ethernet is bad cabling
or ADSL line. Make sure that all connected devices are turned on.
On the front of the product is a bank of LEDs. As a first check, to
verify that the LAN Link and ADSL line LEDs are lit. If they are
not, verify that you are using the proper cables.
The product's LAN port is wired just like a Network Adapter's
port.
1.5 Default Settings
I-Storm ADSL Router can be configured with your Web browser.
The web browser is included as a standard application in following
operation
systems,
UNIX,
Linux,
Mac
OS,
Windows
95/98/NT/2000/Me, etc. The product provides a very easy and
user-friendly interface for configuration.
Before Configuration
This section describes the configuration required by LAN-attached
PCs that communicate with the I-Storm ADSL Router , either to
configure the device, or for network access. These PCs must have
an Ethernet interface installed properly, be connected to the
I-Storm ADSL Router
either directly or through an external
repeater hub, and have TCP/IP installed and configured to obtain
an IP address through a DHCP server or a fixed IP address that
must be in the same subnet of the I-Storm ADSL Router. The
default IP address of the I-Storm ADSL Router is 192.168.1.254
and subnet mask is 255.255.255.0. The best and easy way is to
configure the PC to get an IP address from the I-Storm ADSL
Router.
Please follow the steps below for PC's network environment
installation. First of all, please check your PC's network
components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to MS Windows
relative manuals.
34
Werbung
