Connections - Omnitronic LH-051 Bedienungsanleitung

Never spill any liquids on the device. Should any liquid enter the device nevertheless, remove the battery
immediately. Please let the device be checked by a qualified service technician before you operate it again.
Any damages caused by liquids having entered the device are not subject to warranty!
Do not shake the device. Avoid brute force when operating the device.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Do not permit operation by persons not qualified for operating the device. Most damages are the result of
unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void.

CONNECTIONS

• This device provides 12 or 48 V phantom power for the connected microphones.
• In order to obtain highest sound-quality, only use high-quality cables for connecting the devices. Make sure
that the cables are properly fixed.
• Connect your mics to the Input sockets.
• Connect the Input of your mixer to the Output sockets.
• Connect the connection cable of the power-unit with the DC IN socket. Plug the power unit into your outlet
(Power-LED on).
10/11 00036932.DOC, Version 1.1