Beemoo Swing Bedienungsanleitung Seite 3

Care and maintenance of the pram
For the textile parts intended by the manufacturer to be removable and washable, please read
the attached care label. Never use sharp or abrasive cleaning products, instead use a mild
soap solution or a special textile cleaning product.
The plastic parts and the frame can also be cleaned with a soap solution.
After using the pram in rain or wet conditions, always clean and dry the frame. If the fabric
cover is soaked, allow the pram to dry in its assembled state.
The wheels should regularly be detached and the axles as well as all moving connections and
the suspension should be treated with an acid-free oil (sewing machine oil, WD-40 or fat-free
lubricant). This helps the pram run more smoothly and quietly and limits the amount of early
signs of wear.
Care for your pram and ensure that no flash rust occurs, as this does not constitute a reason
for reclamation.
ATTENTION: The fabrics used are often cotton or blended cotton fabrics which comply
with the current legal requirements.
Heavy wear over a prolonged period (e.g. intensive exposure to sunlight) can cause
colors to fade, particularly in natural textiles; however, this does not constitute a reason
for reclamation.
To open the stroller
Draw the handles. (1)
Use your foot to press and hit the handle at same time. Lift the handle upwards with both
hands, continue this action until the frame is fully open with a "click" sound from lock. (2a &2b)
1
Rear wheels assembly
Push the rear wheel into the rear leg
tube until the spring-loaded pin
engages.
Repeat assembly on the other side.
Check the wheels are locked into
position. (3)
To remove the wheel, just pull the
iron behind the wheel. (4)
2a
3
2b
4
EN